曾召军.爆炸喷涂工艺制备MCrAIY+Al2 03金属陶瓷涂层[J].表面技术,2007,36(5):56-58.
ZENG Zhao-jun.MCrAIY +A1203 Cermet Coatings Obtaintd by Detonation Gun Spraying[J].Surface Technology,2007,36(5):56-58 |
| 爆炸喷涂工艺制备MCrAIY+Al2 03金属陶瓷涂层 |
| MCrAIY +A1203 Cermet Coatings Obtaintd by Detonation Gun Spraying |
| 投稿时间：2007-02-13 修订日期：2007-10-10 |
| DOI： |
| 中文关键词: MCrAIY 爆炸喷涂 高温涂层 组织形貌 金属陶瓷涂层 |
| 英文关键词:McrAIY D-gun spraying High-temperature coatings Microstructure Cermet coating |
| 基金项目:国家自然科学基金资助项目(50479016) |
| 作者 | 单位 |
| 曾召军 | 中国南方航空工业有限责任公司航发公司，湖南株洲412002 |
|
| Author | Institution |
| ZENG Zhao-jun | |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为了提高高温合金材料的高温抗氧化性，利用爆炸喷涂工艺制备了MCrAIY+ A1203金属陶瓷涂层。比较了采用压缩空气和N：作为保护气体对涂层性能的影响，利用扫描电子显微镜( SEM)、显微硬度计对涂层性能进行了分析，在此基础上，进一步研究了涂层的结合强度，并对涂层的高温抗氧化性能进行了测试。结果表明：采用N：作为保护气体，涂层均匀致密，孔隙率小，显微硬度合格；涂层与基体的结合强度达到了95MPa，涂层具有良好的抗氧化性能。 |
| 英文摘要: |
| In order to improve the high temperature oxidation resistance of the super-alloy, the MCrAIY + Al2 03 was deposited on K403 by detonation gun spraying. The effect of different protecting gas on the microstructure and hardness of the coatings was studied. The microstructure and property of the coatings were studied by the means of scanning electron microscopy ( SEM) and accelerometer; The bonding strength and the oxidation resistance at high temperature were also studied. The results show that the MCrAIY coatings with the N2 protecting gas has higher density, less porosity and good hardness. The bonding strength is 95Mpa, and the MCrAIY coatings has good oxidation resistance at high temperature . |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号