杨英歌,周海,陈飞,万汉城,奚明.20钢表面多元共渗硬度的研究[J].表面技术,2007,36(4):20-21.
YANG Ying-ge,ZHOU Hai,CHEN Fe,WAN Han-cheng,XI Ming.Study on Hardness of Multicomponent Permeated 20 Steel[J].Surface Technology,2007,36(4):20-21 |
| 20钢表面多元共渗硬度的研究 |
| Study on Hardness of Multicomponent Permeated 20 Steel |
| 投稿时间：2007-02-28 修订日期：2007-08-10 |
| DOI： |
| 中文关键词: 20钢 多元共渗 显微硬度 |
| 英文关键词:20 steel Multicomponent permeation Microhardness |
| 基金项目: |
| 作者 | 单位 |
| 杨英歌 | 北京石油化工学院材料科学与工程系，北京102617 |
| 周海 | 北京石油化工学院材料科学与工程系，北京102617 |
| 陈飞 | 北京石油化工学院材料科学与工程系，北京102617 |
| 万汉城 | 北京石油化工学院材料科学与工程系，北京102617 |
| 奚明 | 北京石油化工学院材料科学与工程系，北京102617 |
|
| Author | Institution |
| YANG Ying-ge | Beijing Institute of Petro-chemical Technology, Beijing 102617 , China |
| ZHOU Hai | Beijing Institute of Petro-chemical Technology, Beijing 102617 , China |
| CHEN Fe | Beijing Institute of Petro-chemical Technology, Beijing 102617 , China |
| WAN Han-cheng | Beijing Institute of Petro-chemical Technology, Beijing 102617 , China |
| XI Ming | Beijing Institute of Petro-chemical Technology, Beijing 102617 , China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 采用低温气体多元共渗技术在20钢表面同时渗入C、N、0三种元素，在材料表面形成了厚且致密均匀的渗层。利用X射线衍射和扫描电子显微技术测定了渗层相的组成以及渗层的表面形貌，结果表明：渗层以氧化物、氮化物和碳化物为主，且氮化物居多，渗层厚度约50 p.m。显微硬度测量结果表明，相对于原始材料硬度提高了4倍，这在工业生产中有广阔的应用前景。 |
| 英文摘要: |
| Performance of 20 steel was studied by low temperature gas multicomponent permeation technique. Carbon, nitrogen, oxygen were infiltrated into the material. The phase construction and micro-structure of alloying layer were investigated by XRD and SEM technique. The experimental results show that penetrated layer contains oxide, nitride and carbide. And the nitride is primary. The thickness of penetrating layer is about 50pjm. Compared with original material, the penetrated layer has much higher surface hardness. These properties have important significance and foreground in industry. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号