张乾坤,唐俊,肖逸锋,杜萌萌,吴靓,钱锦文,贺跃辉.Mo含量对FeCoCrNiMox高熵合金等离子喷焊层组织与性能的影响[J].表面技术,2022,51(11):279-286.
ZHANG Qian-kun,TANG Jun,XIAO Yi-feng,DU Meng-meng,WU Liang,QIAN Jin-wen,HE Yue-hui.Effect of Mo Content on the Microstructure and Properties of High-entropy alloy Coatings Produced by Plasma Transferred Arc Welding[J].Surface Technology,2022,51(11):279-286
Mo含量对FeCoCrNiMox高熵合金等离子喷焊层组织与性能的影响
Effect of Mo Content on the Microstructure and Properties of High-entropy alloy Coatings Produced by Plasma Transferred Arc Welding
  
DOI:10.16490/j.cnki.issn.1001-3660.2022.11.026
中文关键词:  等离子喷焊  高熵合金喷焊层  微观组织  显微硬度  耐腐蚀性  模具修复
英文关键词:plasma transferred arc welding  high-entropy alloy coatings  microstructure  microhardness  corrosion resistance  mold repair
基金项目:国家自然科学基金项目(51771237、51704257);湖南省联合基金项目(2019JJ60019);青年科学基金项目(51704257)
作者单位
张乾坤 湘潭大学 机械工程学院,湖南 湘潭 411105 ;湘潭大学 焊接机器人与应用技术湖南省重点实验室,湖南 湘潭 411105 
唐俊 湘潭大学 机械工程学院,湖南 湘潭 411105 ;湘潭大学 焊接机器人与应用技术湖南省重点实验室,湖南 湘潭 411105 
肖逸锋 湘潭大学 机械工程学院,湖南 湘潭 411105 ;湘潭大学 焊接机器人与应用技术湖南省重点实验室,湖南 湘潭 411105 
杜萌萌 湘潭大学 机械工程学院,湖南 湘潭 411105 ;湘潭大学 焊接机器人与应用技术湖南省重点实验室,湖南 湘潭 411105 
吴靓 湘潭大学 机械工程学院,湖南 湘潭 411105 ;湘潭大学 焊接机器人与应用技术湖南省重点实验室,湖南 湘潭 411105 
钱锦文 湘潭大学 机械工程学院,湖南 湘潭 411105 ;湘潭大学 焊接机器人与应用技术湖南省重点实验室,湖南 湘潭 411105 
贺跃辉 中南大学 粉末冶金国家重点实验室,长沙 410083 
AuthorInstitution
ZHANG Qian-kun School of Mechanical Engineering,Hunan Xiangtan 411105, China ;Key Laboratory of Welding Robot and Application Technology of Hunan Province, Xiangtan University, Hunan Xiangtan 411105, China 
TANG Jun School of Mechanical Engineering,Hunan Xiangtan 411105, China ;Key Laboratory of Welding Robot and Application Technology of Hunan Province, Xiangtan University, Hunan Xiangtan 411105, China 
XIAO Yi-feng School of Mechanical Engineering,Hunan Xiangtan 411105, China ;Key Laboratory of Welding Robot and Application Technology of Hunan Province, Xiangtan University, Hunan Xiangtan 411105, China 
DU Meng-meng School of Mechanical Engineering,Hunan Xiangtan 411105, China ;Key Laboratory of Welding Robot and Application Technology of Hunan Province, Xiangtan University, Hunan Xiangtan 411105, China 
WU Liang School of Mechanical Engineering,Hunan Xiangtan 411105, China ;Key Laboratory of Welding Robot and Application Technology of Hunan Province, Xiangtan University, Hunan Xiangtan 411105, China 
QIAN Jin-wen School of Mechanical Engineering,Hunan Xiangtan 411105, China ;Key Laboratory of Welding Robot and Application Technology of Hunan Province, Xiangtan University, Hunan Xiangtan 411105, China 
HE Yue-hui State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究不同Mo元素添加量对FeCoCrNiMox(x=0、0.5、1、1.5)高熵合金等离子喷焊层组织和性能的影响,以期望获得一种高硬度、耐腐蚀的喷焊层,用于改善传统工模具表面防护与使用寿命的问题。方法 采用等离子喷焊技术在Q235A低碳钢表面制备了不同Mo含量的高熵合金喷焊层,通过X射线衍射仪(XRD)、光学显微镜(OM)、扫描电子显微镜(SEM)、能量色散X射线光谱仪(EDS)表征其微观组织与相结构,借助显微硬度计和电化学工作站对喷焊层的硬度和耐腐蚀性能进行测试。结果 随着Mo含量x从0逐渐增加到1.5,喷焊层的晶界胞状枝晶组织(枝晶内为白色富Mo相,枝晶间为灰色富Fe、Ni相)逐渐增加,合金微观组织变得细小;喷焊层的硬度由204.4HV0.2增加至706.8HV0.2;喷焊层在3.5%NaCl溶液中呈现出明显的钝化行为,腐蚀电位由‒0.753 V增大到‒0.412 V,腐蚀电流密度由1.23×10‒4 A/cm2减小到3.80×10‒6 A/cm2,点蚀电位由‒0.642 V增大到‒0.371 V,具有优异的耐腐蚀性能。结论 所设计的FeCoCrNiMox合金及相应的等离子喷焊工艺,满足对喷焊层高耐磨以及耐腐蚀性的要求,有望应用于传统工模具的表面防护与修复。
英文摘要:
      Plasma spray welding is a very important and rapidly developing method in surface modification technology. It can strengthen the surface properties without changing the matrix materials, such as improving the wear resistance, corrosion resistance, high temperature oxidation resistance and service life of materials. At the same time, as a new coating material, high entropy alloys (HEAs) has different performance characteristics from traditional coating materials because of its four effects:high entropy effect in thermodynamics, hysteresis diffusion effect in dynamics, lattice distortion effect in structure and cocktail effect in performance. The alloy can have high hardness, high wear resistance, high corrosion resistance and high interfacial compatibility at the same time. At the same time, the alloy elements can be optimized by phase composition prediction and phase diagram simulation, which has good research value. In this paper, FeCoCrNiMo high entropy alloy powder was used as coating material, and high entropy alloy plasma spray welding layer was prepared by plasma spray welding technology. The effects of different Mo content on the microstructure and corrosion resistance of the welding layer were studied.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20322722位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号