刘豪,龙海川,郑鹏飞,邱长军,陈勇.基于弥散强化钨基面向等离子体材料研究进展[J].表面技术,2022,51(8):168-178, 213.
LIU Hao,LONG Hai-chuan,ZHENG Peng-fei,QIU Chang-jun,CHEN Yong.Plasma Facing Materials Based on Dispersion Strengthened Tungsten[J].Surface Technology,2022,51(8):168-178, 213 |
| 基于弥散强化钨基面向等离子体材料研究进展 |
| Plasma Facing Materials Based on Dispersion Strengthened Tungsten |
| |
| DOI：10.16490/j.cnki.issn.1001-3660.2022.08.014 |
| 中文关键词: 面向等离子体材料 弥散强化 钨基材料 力学性能 氢滞留 辐照损伤 |
| 英文关键词:plasma facing materials dispersion strengthening tungsten-based materials mechanical properties hydrogen retention irradiation damage |
| 基金项目:国家重点研发计划(2017YFE0301300) |
|
|
| Author | Institution |
| LIU Hao | University of South China, Hubei Hengyang 421001, China |
| LONG Hai-chuan | University of South China, Hubei Hengyang 421001, China |
| ZHENG Peng-fei | Southwestern Institute of Physics, Chengdu 610225, China |
| QIU Chang-jun | University of South China, Hubei Hengyang 421001, China |
| CHEN Yong | University of South China, Hubei Hengyang 421001, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 重点综述了国内外关于氧化物或碳化物作为强化相的钨基面向等离子体材料的力学性能、氢滞留特性以及辐照损伤，发现制备工艺和强化相含量是影响钨基面向等离子体材料力学性能的主要方面，而均匀分散的强化相颗粒所致使的组织致密化程度更高是钨基材料力学性能提高的主要因素。其次，阐述了晶界和晶内的强化相颗粒分散不均表现出的位移损伤、气泡、绒毛、微裂纹等缺陷都将增加材料对氢同位素的捕获几率，以及等离子体辐照造成的脆化硬化将降低材料的抗热冲击性能。最后分析了近些年弥散强化钨基面向等离子体材料存在的关键基础问题，展望了未来弥散强化钨基材料的主要发展趋势，期望为开发优异的抗高热负荷和辐照损伤的钨基材料方面提供重要参考。 |
| 英文摘要: |
| Plasma facing materials in extreme environment of fusion reactors suffer high temperature corrosion, irradiation damage, and severe fuel retention. Tungsten is currently the main candidate for plasma materials because of its inherent low thermal expansion coefficient, low tritium storage capacity, high radiation resistance, and good corrosion resistance. However, the interaction between plasma and tungsten under deuterium-tritium reaction exhibits such defects as low temperature brittleness, low recrystallization temperature and high toughness-brittle transition temperature, such as pores, vacancies and fatigue cracks, which are difficult to meet the wall loading requirements of future nuclear fusion reactors. At present, the second phase dispersion strengthening has become one of the common methods to improve the performance of tungsten-based plasma facing materials. However, the existence of high heat load and high flux of particles put forward more stringent requirements for the comprehensive performance of dispersion strengthened tungsten-based materials. In recent years, the research on tungsten-based plasma-facing materials in fusion reactor has been mainly focused on three aspects:first, the effect of adding oxide (Y2O3, La2O3, Al2O3, ZrO2) or carbide (TiC, TaC, ZrC) second-phase particles on the microstructure and mechanical properties of tungsten-based materials; second, the hydrogen retention characteristics of dispersion strengthened tungsten based materials; third, the irradiation damage behavior under the action of different particle flows.The research on the mechanical properties of plasma tungsten based materials mainly includes grain size, tensile and compressive strength, recrystallization temperature, toughness brittleness transition temperature and microhardness. The material preparation process and strengthening phase particle content are the two main aspects affecting the mechanical properties of dispersion strengthened tungsten based materials. At present, the preparation methods of particle strengthening phase mainly include powder metallurgy, mechanical alloying, hydrothermal synthesis and wet chemical method, and the relative density and mechanical properties of tungsten based materials prepared by combining with different sintering methods are very different. The uneven dispersion of strengthening phase particles at grain boundaries and in grains, and the irradiation effect of the high-beam particles on the dispersion- strengthened tungsten-based material causes displacement damage, bubbles, fluff in the microstructure and morphology, micro-cracks and other defects will increase the probability of the material capturing hydrogen isotopes. In addition, the fusion reactor plasma irradiation will also cause embrittlement and hardening of the tungsten material, significantly reducing the thermal shock resistance of the material. This paper reviews the effects of carbide or oxide content on the microstructure and mechanical properties of tungsten based plasma-facing materials prepared by different processes, as well as the latest research progress on hydrogen retention characteristics and irradiation damage in dispersion strengthened tungsten based materials at home and abroad, analyzes the key basic problems of dispersion-strengthened tungsten based plasma-facing materials in recent years, and prospects the main development trends of dispersion-strengthened tungsten based materials in the future, which is expected to provide an important reference for the development of tungsten based materials with excellent resistance to high thermal load and irradiation damage. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号