张国庆,张伟,钱思成,于萱.南海1 200 m深海环境Al-Zn-In合金阳极电化学性能研究[J].表面技术,2022,51(5):177-185.
ZHANG Guo-qing,ZHANG Wei,QIAN Si-cheng,YU Xuan.Electrochemical Properties of Al-Zn-In Alloy Sacrificial Anode at 1 200 m Deepwater Environment in South China Sea[J].Surface Technology,2022,51(5):177-185
南海1 200 m深海环境Al-Zn-In合金阳极电化学性能研究
Electrochemical Properties of Al-Zn-In Alloy Sacrificial Anode at 1 200 m Deepwater Environment in South China Sea
  
DOI:10.16490/j.cnki.issn.1001-3660.2022.05.019
中文关键词:  海工装备  深海腐蚀  阴极保护  牺牲阳极  电化学性能  Al-Zn-In合金
英文关键词:off shore facility  deep-water corrosion  cathodic protection  sacrificial anode  electrochemical performance  Al-Zn-In alloy
基金项目:中国海洋石油集团有限公司的陵水17-2气田开发工程项目(18ZB-DD03);国产阳极深水应用研究项目(CNOOC-05- GC00GC2016-03);国家科技基础资源调查专项(2019FY101400)
作者单位
张国庆 海洋石油工程股份有限公司,天津 300450 
张伟 中山大学 化学工程与技术学院,广东 珠海 519000;南方海洋科学与工程广东省实验室珠海,广东 珠海 519000 
钱思成 海洋石油工程股份有限公司,天津 300450 
于萱 海洋石油工程股份有限公司,天津 300450 
AuthorInstitution
ZHANG Guo-qing Offshore Oil Engineering Co., Ltd., Tianjin 300450, China 
ZHANG Wei School of Chemical Engineering and Technology, Sun Yat-sen University, Guangdong Zhuhai 519000, China;Southern Ocean Science and Engineering Guangdong Laboratory Zhuhai, Guangdong Zhuhai 519000, China 
QIAN Si-cheng Offshore Oil Engineering Co., Ltd., Tianjin 300450, China 
YU Xuan Offshore Oil Engineering Co., Ltd., Tianjin 300450, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究对比了3种不同配方Al-Zn-In合金阳极在南海环境条件下的腐蚀形貌及电化学容量、电化学效率等性能参数,为深海工程装备的阴极防护设计提供可靠的参考依据。方法 通过在我国南海1 200 m深海试验架上搭载阳极阴极保护测试装置及数据采集、存储系统,采用自放电测试(Free Running Test,FRT)试验方法研究了阳极在110 d长周期条件下的电化学性能,采用超景深三维显微镜对其表面腐蚀形貌进行了观测。结果 1#—3#阳极下水后工作电位均快速活化,整个试验阶段,平均工作电位分别为‒1.029、‒1.033、‒1.098 V(Ag/AgCl/海水);电化学效率分别为81.62%、78.02%、87.90%。仅自主设计的3#配方阳极的开路电位和电化学效率达到了UNE-EN 12496-2013阴极保护设计标准的要求。结论 与模拟深海环境下的恒电流测试(Galvanostatic Test,GST)短期试验(4 d)结果相比,同一配方阳极在深海110 d长周期FRT测试条件下的电化学效率分别降低15.13%,18.87%和8.14%。长周期FRT试验更接近实际阳极服役状态,可为深海阴极保护设计参数选择提供可靠性参考。相较于1#和2#阳极,3#阳极In元素增加了1倍,使得工作电位更负,溶解区域晶粒细化,电化学效率更高。但是3#阳极表面却发现了局部未溶解区域。可见,仅通过增加In含量对于改善铝合金表面腐蚀形貌效果有限。
英文摘要:
      Sacrificial anode cathodic protection is one of the most important corrosion protection methods for deep-water steel structures. The electrochemical performance of sacrificial anode in deep-water environment directly affects the protection effect and service life of the facilities. By means of the cathodic protection test device and data acquisition/storage system installed on the 1 200 m Deepwater test rack in the South China Sea, the free Running Test (FRT) was applied to study the electrochemical performance of sacrificial anode under the 110 days cycle condition. Solution morphology, electrochemical capacity, current efficiency and other performance of 3 kinds of composition Al-Zn-In-based sacrificial anodes were compared under the environmental conditions in the South China Sea, providing a reliable reference for the cathodic protection design of deepwater subsea engineering facilities.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20112298位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号