崔桂彬,鞠新华,尹立新,严春莲.热浸镀铝硅镀层微观组织结构表征[J].表面技术,2021,50(8):375-381.
CUI Gui-bin,JU Xin-hua,YIN Li-xin,YAN Chun-lian.Characterization of Microstructure of Hot-dip Al-Si Coating[J].Surface Technology,2021,50(8):375-381
热浸镀铝硅镀层微观组织结构表征
Characterization of Microstructure of Hot-dip Al-Si Coating
投稿时间:2020-10-07  修订日期:2020-12-14
DOI:10.16490/j.cnki.issn.1001-3660.2021.08.037
中文关键词:  热浸镀  铝硅镀层  物相  EBSD  菊池花样
英文关键词:hot dip  Al-Si coating  phase  EBSD  Kikuchi pattern
基金项目:
作者单位
崔桂彬 首钢集团有限公司技术研究院,北京 100043 
鞠新华 首钢集团有限公司技术研究院,北京 100043 
尹立新 首钢集团有限公司技术研究院,北京 100043 
严春莲 首钢集团有限公司技术研究院,北京 100043 
AuthorInstitution
CUI Gui-bin Shougang Group Company Limited Research Institute of Technology, Beijing 100043, China 
JU Xin-hua Shougang Group Company Limited Research Institute of Technology, Beijing 100043, China 
YIN Li-xin Shougang Group Company Limited Research Institute of Technology, Beijing 100043, China 
YAN Chun-lian Shougang Group Company Limited Research Institute of Technology, Beijing 100043, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究热成形钢热浸镀铝硅镀层的微观组织与物相组成。方法 利用扫描电镜(SEM)和能谱仪(EDS)分析铝硅镀层表面与截面的微观组织形貌与成分,利用X射线衍射(XRD)和电子背散射衍射技术(EBSD)分析铝硅镀层的物相组成与比例。结果 热浸镀铝硅镀层表面由富Al相、少量的富Fe相以及树枝晶网状分布的高Si相构成,截面是由内外两层组成,其靠近铁基体的内层为Fe-Al-Si合金层,外层为Al-Si层。进一步的研究显示,Al-Si层由富Al相、少量的富Fe相以及柱状分布的高Si相构成,高Si相主要存在于合金层与铝硅层界面以及Al-Si层中。结论 热浸镀铝硅镀层中富Al相、富Fe相、高Si相和Fe-Al-Si三元合金层的物相分别为Al、Al13Fe4、Si和Al8Fe2Si。对热浸镀铝硅镀层中高Si相的研究显示,分布于合金层与铝硅层界面处的高Si相,可以有效阻碍镀层的生长,而分布于铝硅层中的高Si相在空间中以立体网状骨架的结构形式存在,这种立体网状结构形式作为镀层的主体框架,可以有效地提高镀层的强韧性和成形性能。
英文摘要:
      This paper aims to study the microstructure and phase composition of hot-dip Al-Si coating on hot-formed steel. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) were used to analyze the microstructure and composition of the surface and cross-section of the Al-Si coating; X-ray diffraction (XRD) and electron backscatter diffraction (EBSD) were used to analyze the phase composition and ratio of the Al-Si coating. The surface of the hot-dip Al-Si coating is composed of Al-rich phase, a small amount of Fe-rich phase, and high Si phase with dendritic network distribution; the cross-section of the hot-dip Al-Si coating is composed of inner and outer layers, the inner layer close to the iron matrix is an Fe-Al-Si alloy layer, and the outer layer is an Al-Si layer. Further research shows that the Al-Si layer is composed of Al-rich phase, a small amount of Fe-rich phase, and columnar distributed high Si phase; the high Si phase mainly exists at the interface between the alloy layer and the Al-Si layer and in the Al-Si layer. The phases of Al-rich phase, Fe-rich phase, high Si phase and Fe-Al-Si ternary alloy layer in the hot-dip Al-Si coating are Al, Al13Fe4, Si and Al8Fe2Si respectively. The study of high Si phase in hot-dip Al-Si coating has shown that the high-Si phase distributed at the interface between the alloy layer and the Al-Si layer can effectively hinder the growth of the coating, while the high-Si phase distributed in the Al-Si layer exists in the form of a three-dimensional network framework in space. This three-dimensional network structure as the main frame of the coating can effectively improve the strength and toughness and formability of the coating.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19935232位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号