冯力,胡昱轩,李文生,王贵平,王军.冷喷涂辅助原位合成CuFeCrAlNiTi高熵合金涂层的组织性能研究[J].表面技术,2021,50(7):194-202.
FENG Li,HU Yu-xuan,LI Wen-sheng,WANG Gui-ping,WANG Jun.Microstructure and Properties of CuFeCrAlNiTi High Entropy Alloy Coating Prepared by Cold Spray Assisted In-situ Synthesis[J].Surface Technology,2021,50(7):194-202
冷喷涂辅助原位合成CuFeCrAlNiTi高熵合金涂层的组织性能研究
Microstructure and Properties of CuFeCrAlNiTi High Entropy Alloy Coating Prepared by Cold Spray Assisted In-situ Synthesis
投稿时间:2020-10-19  修订日期:2021-02-27
DOI:10.16490/j.cnki.issn.1001-3660.2021.07.020
中文关键词:  冷喷涂  原位合成  CuFeCrAlNiTi高熵合金涂层  摩擦  电化学
英文关键词:cold spraying  in-situ synthesis  CuFeCrAlNiTi high entropy alloy coating  friction  electrochemistry
基金项目:国家重点研发计划(2016YFE0111400);甘肃省重点研究项目(17YF1WA159);中国博士后科学基金项目(2018-63-200618-34)
作者单位
冯力 兰州理工大学 材料科学与工程学院,兰州 730050;有色金属先进加工与再利用国家重点实验室,兰州 730050 
胡昱轩 兰州理工大学 材料科学与工程学院,兰州 730050 
李文生 兰州理工大学 材料科学与工程学院,兰州 730050;有色金属先进加工与再利用国家重点实验室,兰州 730050 
王贵平 兰州理工大学 材料科学与工程学院,兰州 730050 
王军 兰州理工大学 材料科学与工程学院,兰州 730050 
AuthorInstitution
FENG Li School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China;State Key Laboratory of Advanced Processing and Reuse of Non Ferrous Metals, Lanzhou 730050, China 
HU Yu-xuan School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China 
LI Wen-sheng School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China;State Key Laboratory of Advanced Processing and Reuse of Non Ferrous Metals, Lanzhou 730050, China 
WANG Gui-ping School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China 
WANG Jun School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了提升普通金属材料的表面性能,提出了一种在普通金属材料表面制备性能较好的CuFeCrAlNiTi高熵合金涂层的技术工艺。方法 采用Cu、Fe、Cr、Al、Ni、Ti六种金属单质粉末为原料,经过2 h机械混合后,使用低压冷喷涂技术在45#钢基体上制备混合金属涂层,再经感应重熔技术将混合金属涂层原位合成为CuFeCrAlNiTi高熵合金涂层。采用扫描电子显微镜(SEM)、能谱仪(EDS)及X射线衍射仪(XRD),对混合金属涂层和原位合成CuFeCrAlNiTi高熵合金涂层的微观组织和相结构进行观察分析,并对原位合成CuFeCrAlNiTi高熵合金涂层的硬度、摩擦性能及耐腐蚀性能进行检测分析。结果 原位合成CuFeCrAlNiTi高熵合金涂层组织致密、元素分散均匀;涂层结构是简单的固溶体结构BCC相和FCC相。涂层的综合性能良好,硬度可达543.4HV,与Al2O3的干摩擦因数为0.428,是45#基体与Al2O3的干摩擦因数的61.6%,且较基体有更好的耐氯盐腐蚀性能,并在1 mol/L的NaCl溶液和0.5 mol/L的H2SO4溶液中电化学腐蚀后,涂层中都不会形成腐蚀产物。结论 使用冷喷涂辅助原位合成的CuFeCrAlNiTi高熵合金涂层具有相对较高的硬度、较好的摩擦性能以及耐氯盐腐蚀性能。
英文摘要:
      In order to improve the surface properties of common metal materials, a new technology for preparing CuFeCrAlNiTi high entropy alloy coating with good properties was proposed. In this paper, Cu, Fe, Cr, Al, Ni and Ti are used as raw materials. After 2 hours of mechanical mixing, the mixed metal coating is prepared on the 45# steel matrix by low-pressure cold spraying technology. Then, the mixed metal coating is synthesized in-situ into CuFeCrAlNiTi high-entropy alloy coating by induction remelting technology. Scanning electron microscope (SEM), energy spectrum (EDS) and X-ray diffraction (XRD) were used to observe and analyze the microstructure and phase structure of the mixed metal coating and the in-situ synthesis CuFeCrAlNiTi high-entropy alloy coating, and the hardness, friction and corrosion resistance of the in-situ synthesis CuFeCrAlNiTi high-entropy alloy coating were analyzed. The results showed that CuFeCrAlNiTi high entropy alloy coating was prepared in situ with fine microstructure and uniform element dispersion. The coating structure is the simple solid solution structure BCC phase and FCC phase. The coating has a good comprehensive performance with a hardness up to 543.4HV, and the dry friction coefficient with Al2O3 is 0.428, which is 61.6% of the dry friction coefficient between 45# and Al2O3. Besides, the coating has a better chlorine-resistant performance than the matrix, and will not form corrosion derivatives in the coating after the electrochemical corrosion of 1 mol/L NaCl solution and 0.5 mol/L H2SO4 solution. Therefore, CuFeCrAlNiTi high-entropy alloy coating synthesized in situ by cold spraying has relatively high hardness, good friction and chloride corrosion resistance.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19494960位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号