周子超,张豪,张雪,常伟杰,宋玲玲,黄传,多树旺.等离子体增强磁控溅射CrSiN涂层摩擦磨损行为[J].表面技术,2020,49(8):185-191.
ZHOU Zi-chao,ZHANG Hao,ZHANG Xue,CHANG Wei-jie,SONG Ling-ling,HUANG Chuan,DUO Shu-wang.Friction and Wear Behavior of CrSiN Coatings Deposited by Plasma Enhanced Magnetron Sputtering[J].Surface Technology,2020,49(8):185-191
等离子体增强磁控溅射CrSiN涂层摩擦磨损行为
Friction and Wear Behavior of CrSiN Coatings Deposited by Plasma Enhanced Magnetron Sputtering
投稿时间:2019-11-30  修订日期:2020-08-20
DOI:10.16490/j.cnki.issn.1001-3660.2020.08.021
中文关键词:  等离子体增强磁控溅射技术  CrSiN涂层  Si含量  微观结构  力学性能  摩擦磨损
英文关键词:plasma enhanced magnetron sputtering  CrSiN coating  Si content  microstructure  mechanical properties  friction and wear
基金项目:江西省自然科学基金(20171BAB206008);江西省教育厅科技计划重点项目(GJJ180596);江西科技师范大学硕士研究生创新专项资金项目(YC2019-X11);江西科技师范大学本科生科研项目(20161004082);江西科技师范大学校级重点科研项目(2016XJZD004)
作者单位
周子超 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
张豪 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
张雪 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
常伟杰 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
宋玲玲 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
黄传 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
多树旺 江西科技师范大学 江西省材料表面工程重点实验室,南昌 330013 
AuthorInstitution
ZHOU Zi-chao Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
ZHANG Hao Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
ZHANG Xue Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
CHANG Wei-jie Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
SONG Ling-ling Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
HUANG Chuan Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
DUO Shu-wang Jiangxi Key Laboratory of Surface Engineering, Jiangxi Science and Technology Normal University, Nanchang 330013, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 基于细晶强化理论,借助新型涂层制备技术获得综合性能优良的CrSiN涂层,研究Si含量对涂层微观结构、力学性能及耐磨性能的影响规律。方法 采用等离子体增强磁控溅射技术,制备四种含有不同Si含量的CrSiN涂层。使用X射线能谱仪(EDS)、X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)和原子力显微镜(AFM),分析涂层的化学成分、晶体结构、微观形貌和表面粗糙度。使用纳米压痕/划痕仪测试涂层的显微硬度、杨氏模量和结合力。使用摩擦磨损试验仪考察涂层的摩擦磨损行为。结果 CrSiN涂层中Si含量随着Si靶功率的增加而增加。所有涂层中均未检测到含Si物相,主要由CrN相组成。随着Si含量的增加,CrN(111)衍射峰逐渐减弱直至消失,涂层由疏松的三角锥结构逐渐变为致密平整的CrN纳米晶和Si3N4非晶共存的复合结构,涂层表面粗糙度显著降低,涂层的显微硬度、杨氏模量、结合力及耐磨性能均呈现先增后降的趋势。结论 Si含量为18.5%的CrSiN涂层具有最佳的耐磨性能,此时涂层的硬度、杨氏模量、结合力和平均摩擦系数分别约为27 GPa、327 GPa、30 N和0.289。
英文摘要:
      The work aims to obtain the CrSiN coatings with excellent comprehensive performance by new coating preparation technology based on the fine-grained strengthening theory, and to study the effects of Si content on the microstructure, mechanical properties and wear resistance of the coatings. Four CrSiN coatings with different Si contents were prepared by plasma enhanced magnetron sputtering. The chemical composition, crystal structure, micromorphology and surface roughness of the coatings were characterized by EDS, XRD, FE-SEM and AFM, respectively. The micro-hardness, Young's modulus and adhesion of the coatings were measured by nano-indentation and nano-scratch, respectively. The friction and wear behavior of the coatings was investigated by a friction and wear tester. The Si content of CrSiN coating increased with the increasing Si target power. CrSiN coatings mainly exhibited a cubic CrN phase, with no Si-containing phase detected. As the Si content increased gradually, the diffraction peak growing along CrN (111) plane was gradually weakened until disappeared, the microstructure of the coating gradually changed from loose triangular grains to compact and smooth composite structure consisting of CrN nano-crystals and Si3N4 amorphous, the surface roughness of the coating was significantly reduced, and the microhardness, Young's modulus, bonding force and wear resistance of the coating firstly increased and then decreased. The CrSiN coating with Si content of 18.5% has the best wear resistance, and its hardness, Young's modulus, bonding force and average friction coefficient are about 27 GPa, 327 GPa, 30 N and 0.289, respectively.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19498212位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号