周秉涛,王友彬,黄秋雨,叶天繁,韦悦周.水热预处理对铝合金表面ZnAl-LDHs涂层防腐蚀性能的影响[J].表面技术,2020,49(4):315-323.
ZHOU Bing-tao,WANG You-bin,HUANG Qiu-yu,YE Tian-fan,WEI Yue-zhou.Effect of Hydrothermal Pre-treatment on Anti-corrosion Properties of ZnAl-LDHs Prepared on the Surface of Aluminium Alloys[J].Surface Technology,2020,49(4):315-323
水热预处理对铝合金表面ZnAl-LDHs涂层防腐蚀性能的影响
Effect of Hydrothermal Pre-treatment on Anti-corrosion Properties of ZnAl-LDHs Prepared on the Surface of Aluminium Alloys
投稿时间:2019-07-25  修订日期:2020-04-20
DOI:10.16490/j.cnki.issn.1001-3660.2020.04.037
中文关键词:  铝合金  ZnAl-LDHs  水热处理  防腐蚀性  形成机理
英文关键词:aluminum alloy  Zn-LDHs  hydrothermal treatment  corrosion resistance  formation mechanism
基金项目:广西自然科学基金(2017GXNSFBA198202);广西创新驱动发展专项(科技重大专项)(AA17204100);南宁市科学研究与技术开发项目(20171005-5)
作者单位
周秉涛 广西大学 a.广西有色金属及特色材料加工重点实验室 b.资源环境与材料学院,南宁 530004 
王友彬 广西大学 a.广西有色金属及特色材料加工重点实验室 b.资源环境与材料学院,南宁 530004 
黄秋雨 广西大学 a.广西有色金属及特色材料加工重点实验室 b.资源环境与材料学院,南宁 530004 
叶天繁 广西大学 a.广西有色金属及特色材料加工重点实验室 b.资源环境与材料学院,南宁 530004 
韦悦周 广西大学 a.广西有色金属及特色材料加工重点实验室 b.资源环境与材料学院,南宁 530004 
AuthorInstitution
ZHOU Bing-tao a.Guangxi Key Laboratory of Processing for Non-Ferrous Metallic and Featured Materials, b.School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China 
WANG You-bin a.Guangxi Key Laboratory of Processing for Non-Ferrous Metallic and Featured Materials, b.School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China 
HUANG Qiu-yu a.Guangxi Key Laboratory of Processing for Non-Ferrous Metallic and Featured Materials, b.School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China 
YE Tian-fan a.Guangxi Key Laboratory of Processing for Non-Ferrous Metallic and Featured Materials, b.School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China 
WEI Yue-zhou a.Guangxi Key Laboratory of Processing for Non-Ferrous Metallic and Featured Materials, b.School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 提高表面ZnAl-LDHs涂层对铝合金的防腐蚀保护性能。方法 首先将6061铝合金放入水热反应釜中,加入去离子水,在120 ℃温度下水热反应30 min。将经过水热预处理的铝合金分别放入50、80 ℃的0.005 mol/L的Zn(NO3)2溶液中浸泡4 h,在铝合金表面制备出ZnAl-LDHs涂层。利用XRD、SEM、EDS、EIS和极化曲线等技术,分析不同制备条件下,铝合金表面ZnAl-LDHs层的形貌、结构及其对铝合金的防腐蚀保护性能。结果 水热预处理后,铝合金表面形成Al(OH)3和AlO(OH)混合层,在其上生长形成的ZnAl-LDHs涂层具有较优的层状结构、较高的结晶度和更加细小致密的纳米片。电化学阻抗和极化曲线的测试结果表明,表面ZnAl-LDHs层可以降低6061铝合金的腐蚀电流密度,提高腐蚀电位和电化学阻抗。水热预处理后的铝合金在80 ℃溶液中形成的ZnAl-LDHs层,其自腐蚀电流密度(Jcorr)仅有0.018 μA/cm2,比未水热处理的铝合金上获得的ZnAl-LDHs层(0.101 μA/cm2)更低,在50 ℃溶液中形成的ZnAl-LDHs层也观察到相同的现象。结论 通过水热预处理可在6061铝合金表面形成Al(OH)3和AlO(OH)混合层,将其作为ZnAl-LDHs层原位生长的前驱体,可以促进ZnAl-LDHs的结晶形核,提高其形核率,使ZnAl-LDHs层的纳米片更细小致密,从而使ZnAl-LDHs层对铝合金具有更好的防腐蚀保护性能。
英文摘要:
      The work aims to improve the corrosion resistance of ZnAl-LDHs on the surface of aluminum alloys. Firstly, the 6061 aluminum alloy was placed in the hydrothermal reactor and hydrothermal treatment was conducted with deionized water for 30 minutes at 120 ℃. Secondly, the aluminum alloy after hydrothermal treatment was respectively immersed in 50 ℃ and 80 ℃ 0.005 mol/L Zn(NO3)2 solution for 4 hours to prepare ZnAl-LDHs coatings. The surface morphology, structure and corrosion resistance of the ZnAl-LDHs coatings prepared in different conditions were analyzed by XRD, SEM, EDS, EIS and polarization curve method, respectively. After hydrothermal treatment, the mixed layer of Al(OH)3 and AlO(OH) was formed on the aluminum alloy and the ZnAl-LDHs coating on such layer had better lamellar structure, higher crystallinity and finer and denser nanosheets. The results of EIS and polarization curve showed that the ZnAl-LDHs coating prepared on the surface of 6061aluminum alloy could reduce the corrosion current density and enhance the corrosion potential. After hydrothermal treatment, ZnAl-LDHs coating was formed on aluminum alloy surface in 80 ℃ solution and the self-corrosion current density was only 0.018 μA/cm2, five times lower than that of ZnAl-LDHs (0.101 μA/cm2) prepared on the surface without hydrothermal treatment. The same condition was also observed on the ZnAl-LDHs coating formed in 50 ℃ solution. A mixed layer of Al(OH)3 and AlO(OH) can be formed on 6061 aluminum surface after hydrothermal treatment and can be used as a precursor for in situ growth of ZnAl-LDHs to promote the crystallization and nucleation of LDHs, reduce the size of coating nanosheets and improve corrosion resistance of ZnAl-LDHs coatings on aluminum alloy.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19952769位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号