纪敬虎,周加鹏,王沫阳,王伟,符永宏.初始表面粗糙度对沟槽织构摩擦性能的影响[J].表面技术,2019,48(2):139-143.
JI Jing-hu,ZHOU Jia-peng,WANG Mo-yang,WANG Wei,FU Yong-hong.Effect of Initial Roughness on the Tribological Properties of Textured Surfaces with Micro-grooves[J].Surface Technology,2019,48(2):139-143
初始表面粗糙度对沟槽织构摩擦性能的影响
Effect of Initial Roughness on the Tribological Properties of Textured Surfaces with Micro-grooves
投稿时间:2018-08-03  修订日期:2019-02-20
DOI:10.16490/j.cnki.issn.1001-3660.2019.02.020
中文关键词:  表面织构  沟槽  粗糙度  摩擦学特性
英文关键词:surface texture  groove  roughness  tribological property
基金项目:国家自然科学基金项目(51305168,51375211,51775248)
作者单位
纪敬虎 1.江苏大学,江苏 镇江 212013;2.江苏华青流体科技有限公司,江苏 苏州 215600 
周加鹏 1.江苏大学,江苏 镇江 212013 
王沫阳 1.江苏大学,江苏 镇江 212013 
王伟 2.江苏华青流体科技有限公司,江苏 苏州 215600 
符永宏 1.江苏大学,江苏 镇江 212013 
AuthorInstitution
JI Jing-hu 1.Jiangsu University, Zhenjiang 212013, China; 2.Jiangsu Huaqing Fluid Technology Co. Ltd, Suzhou 215600, China 
ZHOU Jia-peng 1.Jiangsu University, Zhenjiang 212013, China 
WANG Mo-yang 1.Jiangsu University, Zhenjiang 212013, China 
WANG Wei 2.Jiangsu Huaqing Fluid Technology Co. Ltd, Suzhou 215600, China 
FU Yong-hong 1.Jiangsu University, Zhenjiang 212013, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 探究初始表面粗糙度大小对激光沟槽织构化表面摩擦性能的影响规律。方法 采用脉冲光纤激光器在不同粗糙度的45#钢试样表面制备具有不同深度、规则排列的沟槽织构,利用摩擦磨损试验机进行销-盘式往复摩擦试验,研究初始表面粗糙度对沟槽织构化表面摩擦系数的影响规律,以及不同初始表面粗糙度条件下,激光沟槽织构化表面的摩擦学行为。结果 沟槽织构能够有效降低表面的摩擦系数,初始表面粗糙度、载荷和速度的大小对沟槽织构的润滑减摩性能有较大影响。在较低的载荷下,沟槽织构能有效提高表面的流体动压润滑效应;在较高的载荷下,沟槽织构能够有效改善表面的边界润滑性能。存在最优初始表面粗糙度,使得摩擦系数达到最小,初始表面粗糙度最优值的大小应根据载荷和速度大小来确定。 结论 根据摩擦副表面的载荷和速度工况条件,合理优化初始表面粗糙度能使沟槽织构获得较为理想的润滑减摩效果。
英文摘要:
      The work aims to investigate the influence laws of initial roughness on the tribological properties of laser mi-cro-groove textured surfaces. The regularly arranged micro-grooves were fabricated on the surface of 45# steel specimens with different roughness by pulse fiber laser. The pin-to-disc reciprocating test was carried out by friction and wear tester to study the influence of initial roughness on the friction coefficient of micro-groove textured surface and the tribological behavior of laser micro-groove textured surface under different initial roughness. The friction coefficient could be significantly reduced by groove texture. The initial roughness, load and sliding velocity had significant effect on the tribological properties of groove texture. Hydrodynamic lubrication could be significantly improved by groove texture under the lower load, and boundary lubrication could be effectively improved by groove texture at higher load. There was the optimal initial roughness to minimize the friction coefficient. The optimal value of initial surface roughness could be determined according to load and sliding speed. The ideal performance of friction reduction of the textured surfaces can be obtained by optimizing the initial surface roughness according to the load and speed.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19512657位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号