盛湘飞,李智,周楠楠,程秀全.基于正态分布的喷丸表面覆盖均匀程度与强化效率研究[J].表面技术,2018,47(5):227-232.
SHENG Xiang-fei,LI Zhi,ZHOU Nan-nan,CHENG Xiu-quan.Uniformity of Surface Coverage and Strengthening Efficiency in Shot Peening Process Based on Normal Distribution[J].Surface Technology,2018,47(5):227-232
基于正态分布的喷丸表面覆盖均匀程度与强化效率研究
Uniformity of Surface Coverage and Strengthening Efficiency in Shot Peening Process Based on Normal Distribution
投稿时间:2017-12-05  修订日期:2018-05-20
DOI:10.16490/j.cnki.issn.1001-3660.2018.05.035
中文关键词:  正态分布  喷丸  道次间距  表面覆盖率  均匀程度  强化效率
英文关键词:normal distribution  shot peening  path spacing  surface coverage  uniformity  strengthening efficiency
基金项目:国家自然科学基金项目(51575117);国家自然科学基金(民航联合基金)(61179051);湖南省教育厅项目(15C1183)
作者单位
盛湘飞 南华大学 机械工程学院,湖南 衡阳 421001 
李智 南华大学 机械工程学院,湖南 衡阳 421001 
周楠楠 南华大学 机械工程学院,湖南 衡阳 421001 
程秀全 广州民航职业技术学院 飞机维修工程学院,广州 510403 
AuthorInstitution
SHENG Xiang-fei School of Mechanical Engineering, University of South China, Hengyang 421001, China 
LI Zhi School of Mechanical Engineering, University of South China, Hengyang 421001, China 
ZHOU Nan-nan School of Mechanical Engineering, University of South China, Hengyang 421001, China 
CHENG Xiu-quan School of Aircraft Maintenance Engineering, Guangzhou Civil Aviation College, Guangzhou 510403, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 提高喷丸表面覆盖率分布的均匀程度和强化效率。方法 采用图像处理技术分析了单道次喷丸表面覆盖率在喷丸宽度方向上的分布特征,采用正态分布函数对多道次喷丸表面覆盖率分布的均匀程度以及喷丸强化效率进行了研究。结果 单道次喷丸中,表面覆盖率在喷丸宽度方向上的分布近似呈正态分布。多道次喷丸中,相邻喷丸道次间距对表面覆盖率影响较大,道次间距越小,表面覆盖率越均匀,两者近似呈线性变化关系。当表面覆盖率均匀程度变化范围在0.91~0.99时,道次间距越小,喷丸强化效率越高。而且,喷丸强化效率受构件长度方向尺寸的影响,尺寸越小,不同喷丸道次间距对应的喷丸强化效率越接近。结论 合理选择相邻喷丸道次间距,可在保证喷丸强化效率的基础上有效地提高表面覆盖均匀程度。
英文摘要:
      The work aims to improve the uniformity of surface coverage and the strengthening efficiency of shot peening (SESP). The distribution characteristics of surface coverage in width direction of shot peening was analyzed in single path shot peening (SPSP) by image processing techniques and the distribution uniformity of surface coverage and SESP were investigated in multi paths shot peening (MPSP) by normal distribution function. In SPSP, surface coverage in width direction of shot peening approximated normal distribution. In MPSP, the surface coverage was significantly affected by the adjacent path spacing. The smaller the path spacing was, the more uniform the surface coverage distribution was. There was an approximate linear relationship between the two. SESP increased as the path spacing decreased when the uniformity of surface coverage changed from 0.91 ~ 0.99. Moreover, SESP was also influenced by the length of the peened component and the corresponding SESP for different path spacing got closer as the length reduced. The uniformity of surface coverage can be improved on the basis of ensuring the SESP by selecting the adjacent path spacing reasonably.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19516209位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号