张恩搏,曾德智,李双贵,陈东波,李丹丹,朱红钧.高压高产气井应急试采过程中采气树抗冲蚀性能分析[J].表面技术,2018,47(3):183-190.
ZHANG En-bo,ZENG De-zhi,LI Shuang-gui,CHEN Dong-bo,LI Dan-dan,ZHU Hong-jun.Erosion Resistance of Gas Production Tree during Emergent Trial Production of High-pressure and High-output Gas Wells[J].Surface Technology,2018,47(3):183-190
高压高产气井应急试采过程中采气树抗冲蚀性能分析
Erosion Resistance of Gas Production Tree during Emergent Trial Production of High-pressure and High-output Gas Wells
投稿时间:2017-10-15  修订日期:2018-03-20
DOI:10.16490/j.cnki.issn.1001-3660.2018.03.030
中文关键词:  采气树  冲蚀  应急试采  日产量  日出砂量  气固两相流  数值模拟
英文关键词:gas production tree  erosion  emergenttrial production  daily output  daily sand output  sand volume  gas-solid flow  numerical simulation
基金项目:国家自然科学基金项目(51374177)
作者单位
张恩搏 西南石油大学 油气藏地质及开发工程国家重点实验室,成都 610500 
曾德智 西南石油大学 油气藏地质及开发工程国家重点实验室,成都 610500 
李双贵 中国石化西北油田分公司石油工程技术研究院,乌鲁木齐 830011 
陈东波 中国石化西北油田分公司石油工程技术研究院,乌鲁木齐 830011 
李丹丹 中国石化西北油田分公司石油工程技术研究院,乌鲁木齐 830011 
朱红钧 西南石油大学 油气藏地质及开发工程国家重点实验室,成都 610500 
AuthorInstitution
ZHANG En-bo State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China 
ZENG De-zhi State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China 
LI Shuang-gui Engineering Technology Institute of SINOPEC Xibei Oilfield Company, Urumchi 830011, China 
CHEN Dong-bo Engineering Technology Institute of SINOPEC Xibei Oilfield Company, Urumchi 830011, China 
LI Dan-dan Engineering Technology Institute of SINOPEC Xibei Oilfield Company, Urumchi 830011, China 
ZHU Hong-jun State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究高压高产气井在大排量应急试采工况下,日产量和日出砂量对气固两相流采气树冲蚀行为的影响。方法 运用CFD数值模拟方法,在Eulerian和Lagrangian坐标系下求解气体-颗粒、颗粒-壁面间的相互作用,并捕捉颗粒运动轨迹。采用用户自定义函数(UDF)编写冲蚀磨损方程,分析日产量和日出砂量对于采气树冲蚀速率、冲蚀位置和颗粒轨迹的影响。结果 日产量由100万方增加到1000万方时,采气树内气体流速逐渐增大,最大流速为当地音速365 m/s,最大冲蚀速率则由4.14×10−8 kg/(s•m2)增大至3.462×10−7 kg/(s•m2)。气体从采气树四通内流入两翼支管发生节流,压降随日产量的增加而增大。当日产量为1000万方时,最大压降为1.52 MPa;当日产量超过300万方,气体流入旁通支管时,压降形成的流动功将大部分颗粒直接带入支管,造成主要冲蚀区域由四通内壁扩大至旁通支管内壁。当日出砂量由7.7方增大至38.5方时,最大冲蚀速率由7.121×10−8 kg/(s•m2)增大至3.462×10−7 kg/(s•m2)。结论 日产量和日出砂量均与冲蚀速率呈正相关关系,控制应急试采日产量是降低采气树冲蚀速率的有效方式。
英文摘要:
      The work aims to analyze effects of daily output and daily sand output on erosion behavior of gas/solid flow gas production treeduring emergent trial production of high-pressure and high-output gas wells. CFD numerical simulation method was used to simulate interactions of gas-particle and particle-wall in Eulerian and Lagrangian coordinates, and capture motion trail of particles. User defined function (UDF) was used to develop erosion wear equation, and analyze the effects of daily output and daily sand output on erosion rate, erosion position and particle trail of gas production tree. As the daily output increased from 1.0×106 to 1.0×107 m3, gas flow rate in the tree gradually increased to local acoustic velocity of 365 m/s, the maximum erosion rate increased from 4.14×10−8 kg/(s•m2) to 3.462×10−7 kg/(s•m2). The gas was throttled as it flowed into branch pipes on both flanks from four-way pipe in the tree. Pressure drop increased with the increase of daily output, and the maximum pressure drop was 1.52 MPa when daily output reached 1.0×107 m3. When daily output exceeded 3.0×106 m3, mostparticles were brought in branch lines by flow work caused by pressure drop as the gas flowed into by-pass branch pipes. Hence major erosion regionwas expanded to inner walls of by-pass branch pipes from inner wallsof four-way pipes. As the sand output increased from 7.7 m3 to 38.5 m3, the maximum erosion rate increased from 7.121×10−8 kg/(s•m2) to 3.462×10−7 kg/(s•m2). Daily outputis positively related toerosion rate. Controlling daily output of emergent trial production is effective approach of reducingthe erosion rate.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20038144位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号