刘欢欢,王帅星,刘小辉,赵晴,余丽霞,高傲,钟宏.Ti2AlNb合金微弧氧化电解液优化及耐磨性研究[J].表面技术,2018,47(1):85-91.
LIU Huan-huan,WANG Shuai-xing,LIU Xiao-hui,ZHAO Qing,YU Li-xia,GAO Ao,ZHONG Hong.Optimization of Micro-arc Oxidation Electrolyte for Ti2AlNb Alloy and Wear Resistance of Coatings[J].Surface Technology,2018,47(1):85-91
Ti2AlNb合金微弧氧化电解液优化及耐磨性研究
Optimization of Micro-arc Oxidation Electrolyte for Ti2AlNb Alloy and Wear Resistance of Coatings
投稿时间:2017-05-28  修订日期:2018-01-20
DOI:10.16490/j.cnki.issn.1001-3660.2018.01.014
中文关键词:  Ti2AlNb合金  微弧氧化  Na2MoO4  耐磨性
英文关键词:Ti2AlNb alloy  micro-arc oxidation  Na2MO4  wear resistance
基金项目:轻合金加工科学与技术国防重点学科实验室开放基金(gf201501002);江西省教育厅科学技术项目(GJJ160712);国家自然科学基金(51361025)
作者单位
刘欢欢 南昌航空大学 a.材料科学与工程学院,南昌 330063 
王帅星 南昌航空大学 a.材料科学与工程学院 b.轻合金加工科学与技术国防重点学科实验室,南昌 330063 
刘小辉 南昌航空大学 a.材料科学与工程学院,南昌 330063 
赵晴 南昌航空大学 a.材料科学与工程学院 b.轻合金加工科学与技术国防重点学科实验室,南昌 330063 
余丽霞 南昌航空大学 a.材料科学与工程学院,南昌 330063 
高傲 南昌航空大学 a.材料科学与工程学院,南昌 330063 
钟宏 南昌航空大学 a.材料科学与工程学院,南昌 330063 
AuthorInstitution
LIU Huan-huan a.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
WANG Shuai-xing a.School of Materials Science and Engineering, b.National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University, Nanchang 330063, China 
LIU Xiao-hui a.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
ZHAO Qing a.School of Materials Science and Engineering, b.National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University, Nanchang 330063, China 
YU Li-xia a.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
GAO Ao a.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
ZHONG Hong a.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 优化Ti2AlNb合金微弧氧化的电解液配方,提高Ti2AlNb合金微弧氧化膜的耐磨性。方法 借助SEM、EDS、XRD研究硅酸盐-磷酸盐电解液体系中Na2MoO4浓度对Ti2AlNb合金微弧氧化膜形貌、成分及相结构的影响。利用CFT-I型磨损试验机测试不同微弧氧化膜的摩擦磨损性能。结果 电解液中添加Na2MoO4后,微弧氧化膜的生长速率增加,膜层中出现了Mo元素且含量也逐渐增加。Na2MoO4的加入降低了Ti2AlNb合金微弧氧化膜的摩擦系数及比磨损率,但微弧氧化膜的耐磨性并非随Na2MoO4含量线性提高。含6 g/L Na2MoO4的体系中,微弧氧化膜摩擦系数低至0.25左右,比磨损率仅为1.20×10−3 mm3/(N•m),表面呈轻微磨粒磨损特征。结论 电解液中的Na2MoO4参与了成膜过程,对Ti2AlNb合金微弧氧化膜的生长有显著的促进作用,有效地改善了Ti2AlNb合金微弧氧化膜的耐磨性。
英文摘要:
      The work aims to optimize micro-arc oxidation (MAO) electrolyte formula for Ti2AlNb alloy and improve wear resistance of MAO coatings on Ti2AlNb alloy. Effects of Na2MoO4 concentration on morphology, element composition and phase structure of MAO coatings on Ti2AlNb alloy were investigated in silicate-phosphate electrolyte system by virtue of SEM, EDS and XRD. Friction and wear properties of MAO coatings were tested with ball-disc wear tester. After the addition of Na2MoO4 in the electrolyte, growth rate of MAO coatings increased, Mo element appeared on the MAO coatings and Mo content increased gradually. Friction coefficient and volume wear rate of MAO coatings were reduced as Na2MoO4 was added in the electrolyte. However, the wear resistance of MAO coatings did not increase linearly with the increase of Na2MoO4 content. In the system with 6 g/L Na2MoO4, the friction coefficient of MAO coating reduced to nearly 0.25, and the volume wear rate was only 1.20×10−3 mm3/(N•m), and the surface featured in slight abrasive wear. Na2MoO4 in the electrolytes participates in the film-forming process, plays an important role in promoting growth of MAO coatings on Ti2AlNb alloy and can effectively improve its wear resistance.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19512451位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号