吴斌,鲁侠,王永欣,李金龙,叶育伟,赵文杰.TiN及TiSiN涂层在海水环境下的摩擦学行为研究[J].表面技术,2017,46(11):143-148.
WU Bin,LU Xia,WANG Yong-xin,LI Jin-long,YE Yu-wei,ZHAO Wen-jie.Tribological Behavior of TiN and TiSiN Coatings in Seawater[J].Surface Technology,2017,46(11):143-148 |
| TiN及TiSiN涂层在海水环境下的摩擦学行为研究 |
| Tribological Behavior of TiN and TiSiN Coatings in Seawater |
| 投稿时间：2017-07-25 修订日期：2017-11-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2017.11.020 |
| 中文关键词: TiN涂层 TiSiN涂层 硅掺杂 摩擦 磨损 润滑 海水 |
| 英文关键词:TiN coating TiSiN coating silicon doping friction wear lubrication seawater |
| 基金项目:中国科学院战略性先导科技专项（A类）（XDA13040601）；国家自然科学基金（51475449）；国家973计划子课题（2014CB643302）；江苏省重点研发计划（BE2016115）；宁波市自然科学基金（2016A610267） |
|
|
| Author | Institution |
| WU Bin | Key Laboratory of Marine Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
| LU Xia | Key Laboratory of Marine Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
| WANG Yong-xin | Key Laboratory of Marine Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
| LI Jin-long | Key Laboratory of Marine Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
| YE Yu-wei | Key Laboratory of Marine Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
| ZHAO Wen-jie | Key Laboratory of Marine Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 对比研究海水环境下TiN及TiSiN涂层与Al2O3对磨的摩擦磨损行为。方法 采用多弧离子镀技术在316L不锈钢及单晶硅片上制备TiN及TiSiN涂层。利用场发射扫描电子显微镜（SEM）、X射线衍射仪（XRD）及X射线光电子能谱仪（XPS）分析了涂层的截面形貌及化学组织成分。选择纳米压痕仪测量了TiN及TiSiN涂层的硬度及弹性模量，使用UMT-3往复式摩擦试验机研究了人工模拟海水环境下Al2O3与TiN及TiSiN涂层对磨后的摩擦磨损行为，并采用扫描电镜（SEM）、电子能谱（EDS）及表面轮廓仪来深入分析了磨痕的摩擦磨损情况。结果 研究表明，TiN涂层的硬度为32.5 GPa，当Si元素掺入涂层以后，TiSiN涂层的硬度提高到了37 GPa。同时，较之于TiN涂层，TiSiN涂层的腐蚀电流密度下降了一个数量级。在摩擦实验中，TiN涂层的摩擦系数和磨损率分别为0.35和5.21×10-6 mm3/(N•m)，而TiSiN涂层的摩擦系数和磨损率均有明显下降，分别为0.24和1.96×10-6 mm3/(N•m)。结论 Si元素掺杂后能显著提高TiN涂层在海水环境下的摩擦学性能，主要归因于结构的致密，硬度、韧性、抗腐蚀性的提高及润滑相的形成。 |
| 英文摘要: |
| The work aims to compare friction and wear behavior of TiN and TiSiN coatings sliding against Al2O3 in seawater. TiN and TiSiN coatings were fabricated on 316L stainless steel and monocrystalline silicon wafer by adopting cathodic arc ion plating technique. Cross-sectional morphology and chemical composition of the coatings were analyzed with SEM, XRD and XPS. Hardness and elasticity modulus of the TiN and TiSiN coatings were measured with nano-indentor. The friction and wear behavior of TiN and TiSiN coatings sliding against Al2O3 in simulated seawater was studied with UMT-3 reciprocating friction testing machine. Friction and wear conditions of grinding cracks were thoroughly analyzed with SEM, EDS and a surface profiler. Hardness of TiN coating was 32.5 GPa. After silicon was doped, hardness of the TiSiN coating was up to 37 GPa. Meanwhile, , corrosion current density of TiSiN coating decreased by one order of magnitude compared to TiN coating. In the frictional experiment, friction coefficient and wear rate of the TiN coating was 0.35 and 5.21×10-6 mm3/(N•m), respectively. In contrast, friction coefficient and wear rate of the TiSiN coating decreased significantly to 0.24 and 1.96×10-6 mm3/(N•m), respectively. Tribological properties of the TiN coating are obviously improved by silicon doping due to dense structure, improvement of hardness, toughness and corrosion resistance, and formation of lubrication phase. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号