陈宇,潘正凯,陈均.水性聚苯胺/海泡石/丙烯酸乳液复合防腐蚀涂层研究[J].表面技术,2017,46(7):26-31.
CHEN Yu,PAN Zheng-kai,CHEN Jun.Waterborne Polyaniline/Sepiolite/Acrylic Emulsion Composite Anticorrosive Coating[J].Surface Technology,2017,46(7):26-31 |
| 水性聚苯胺/海泡石/丙烯酸乳液复合防腐蚀涂层研究 |
| Waterborne Polyaniline/Sepiolite/Acrylic Emulsion Composite Anticorrosive Coating |
| 投稿时间：2017-03-20 修订日期：2017-07-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2017.07.005 |
| 中文关键词: 聚苯胺 海泡石 丙烯酸乳液 防腐蚀 涂层 |
| 英文关键词:polyaniline sepiolite acrylic emulsion anti-corrosion coating |
| 基金项目:国家自然科学基金（U1460106）；马鞍山市科技局项目（2014-16） |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究水性聚苯胺/海泡石/丙烯酸乳液复合防腐涂层在NaCl溶液中对马口铁的防腐效果。方法 采用原位化学氧化聚合方法，制备了聚苯胺/海泡石复合材料，并以丙烯酸乳液为成膜物质，制备了水性聚苯胺/海泡石/丙烯酸乳液复合防腐蚀涂层材料。通过扫描电镜和EDX对聚苯胺/海泡石复合材料的结构和形貌进行了表征。利用电化学交流阻抗谱、塔菲尔曲线和硫酸铜点滴试验，研究了海泡石/苯胺投料比、聚苯胺/海泡石复合材料用量、磷酸浓度等对复合涂层防腐性能的影响。结果 扫描电镜观察显示，苯胺/海泡石复合材料具有纤维状结构。电化学测试及硫酸铜点滴试验表明，当海泡石/苯胺投料比为6:10、聚苯胺/海泡石复合材料用量为0.2%、磷酸浓度为0.1 mol/L时，其腐蚀电流密度为1.013106 A/cm2，腐蚀电位为0.385 V，极化电阻为14 350.8 Ω，耐硫酸铜腐蚀时间为275 s，防腐效果最佳。结论 当海泡石/苯胺投料比为6:10、聚苯胺/海泡石复合材料用量为0.2%、磷酸浓度为0.1 mol/L时，水性聚苯胺/海泡石/丙烯酸乳液复合防腐涂层对马口铁具有最佳的防腐效果。 |
| 英文摘要: |
| The work aims to study anti-corrosion effects of waterborne polyaniline/sepiolite/acrylic emulsion composite coatings on tinplate in sodium chloride medium. Waterborne polyaniline/sepiolite/acrylic emulsion composite anti-corrosive coating was prepared by blending polyaniline/sepiolite composite synthesized in the method of in-situ chemical oxidization polymerization with acrylic emulsion as film-forming material. Structure and morphology of the polyaniline/sepiolite composite were characterized using scanning electron microscopy and EDX. Effects of sepiolite/aniline feed ratio, polyaniline/sepiolite composite consumption and phosphoric acid concentration on corrosion resistance of composite coating were studied using electrochemical impedance-spectra, Tafel curve and copper sulfate dripping test. SEM indicated that polyaniline/sepiolite composite had fibrous structure. Electrochemical test and copper sulfate dripping test showed that polyaniline/sepiolite/acrylic emulsion composite coating exhibited the best anticorrosive performance. Provided with sepiolite/aniline feed ratio of 6:10, polyaniline/sepiolite composite consumption of 0.2% and phosphoric acid concentration of 0.1 mol/L, the corrosion current was 1.013106 A/cm2, corrosion potential was 0.385 V and polarization resistance was 14 350.8 Ω. Polyaniline/sepiolite/acrylic emulsion composite coating has the best anti-corrosion effect on tinplate provided with sepiolite/aniline feed ratio of 6:10, polyaniline/ sepiolite composite consumption of 0.2% and phosphoric acid concentration of 0.1 mol/L. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号