杨波,李茂东,刘康生,刘光明,翟伟,林金梅,汪元奎.超音速喷涂45CT涂层在KCl+K2SO4+Na2SO4熔融盐中的热腐蚀行为[J].表面技术,2017,46(2):178-183.
YANG Bo,LI Mao-dong,LIU Kang-sheng,LIU Guang-ming,ZHAI Wei,LIN Jin-mei,WANG Yuan-kui.Hot Corrosion Behavior of 45CT Coating Prepared by HOVF in KCl+K2SO4+Na2SO4 Molten Salt[J].Surface Technology,2017,46(2):178-183
超音速喷涂45CT涂层在KCl+K2SO4+Na2SO4熔融盐中的热腐蚀行为
Hot Corrosion Behavior of 45CT Coating Prepared by HOVF in KCl+K2SO4+Na2SO4 Molten Salt
投稿时间:2016-10-12  修订日期:2017-02-20
DOI:10.16490/j.cnki.issn.1001-3660.2017.02.029
中文关键词:  P12钢  45CT涂层  热腐蚀  动力学
英文关键词:P12 steel  45CT coating  hot corrosion  kinetics
基金项目:国家自然科学基金(51161022);江西省教育厅科技计划项目(DB201301133,201301050);广州市质量技术监督局科技项目(2014KJ15)
作者单位
杨波 广州特种承压设备检测研究院,广州 510663 
李茂东 广州特种承压设备检测研究院,广州 510663 
刘康生 南昌航空大学 材料科学与工程学院,南昌 330063 
刘光明 南昌航空大学 材料科学与工程学院,南昌 330063 
翟伟 广州特种承压设备检测研究院,广州 510663 
林金梅 广州特种承压设备检测研究院,广州 510663 
汪元奎 东方锅炉股份有限公司材料研究所,四川 自贡 643001 
AuthorInstitution
YANG Bo Guangzhou Special Pressure Equipment Inspection and Research Institute, Guangzhou 510663, China 
LI Mao-dong Guangzhou Special Pressure Equipment Inspection and Research Institute, Guangzhou 510663, China 
LIU Kang-sheng School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
LIU Guang-ming School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China 
ZHAI Wei Guangzhou Special Pressure Equipment Inspection and Research Institute, Guangzhou 510663, China 
LIN Jin-mei Guangzhou Special Pressure Equipment Inspection and Research Institute, Guangzhou 510663, China 
WANG Yuan-kui Material Research Institute, Dongfang Boiler Group Co., Ltd., Zigong 643001, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究超音速喷涂45CT涂层抗KCl+K2SO4+Na2SO4熔融盐腐蚀性能,了解45CT涂层在熔融盐中的防护及失效机制。方法 将试样置于KCl+K2SO4+Na2SO4混合熔盐中,获得样品在熔盐中不同温度下的腐蚀动力学规律。采用XRD、SEM、EDS对高温腐蚀产物成分、结构、形貌进行分析。结果 45CT涂层在熔融盐中的主要腐蚀产物为Cr2O3、NaCrO2。在600 ℃和650 ℃下,涂层能较好地保护基体,涂层上腐蚀产物层较薄;而在700 ℃下,涂层退化严重,涂层内有大量金属硫化物,基体中的Fe向涂层扩散。结论 在高温条件下,涂层易发生硫化,导致涂层与氧化膜的弱结合。随着测试温度升高,涂层在KCl+K2SO4+Na2SO4熔融盐中的热腐蚀越严重,涂层失效加快。
英文摘要:
      The work aims to study corrosion property of 45CT coating prepared by HOVF in KCl + K2SO4+ Na2SO4 molten salt, and understand the protection and failure mechanisms of 45CT coating in molten salt. The samples were immersed in KCl+K2SO4+Na2SO4 mixed molten salt to obtain corrosion kinetic of the samples in the molten salt at different temperatures. The composition, structure and morphology of high temperature corrosion products were investigated by using XRD, SEM and EDS. Main corrosion products of the 45CT coating corroded molten salt were identified as Cr2O3 and NaCrO2. The coating could protect the substrate effectively and the layer of corrosion products on it was thinner at 600 ℃ and 650 ℃. However, the coating degraded seriously at 700 ℃ and a lot of sulfides were detected in the coating. Fe in the substrate diffused toward the coating. Sulphidation occurs easily in 45CT coating at high temperature, leading to weak bonding between the oxide film and coating. As temperature increases, hot corrosion of 45CT coating in KCl+ K2SO4+Na2SO4 molten salt becomes more serious and results in faster coating degradation.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19508165位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号