蒋红琰,陈家俊.不同工作参数下水轴承的空化程度及微形貌特征对减阻效果的影响[J].表面技术,2016,45(11):41-47.
JIANG Hong-yan,CHEN Jia-jun.Influence of Cavitation and Microtopography of High-speed Water-lubricated Hydrostatic Bearing on Drag-reduction Effects[J].Surface Technology,2016,45(11):41-47
不同工作参数下水轴承的空化程度及微形貌特征对减阻效果的影响
Influence of Cavitation and Microtopography of High-speed Water-lubricated Hydrostatic Bearing on Drag-reduction Effects
投稿时间:2016-04-08  修订日期:2016-11-20
DOI:10.16490/j.cnki.issn.1001-3660.2016.11.006
中文关键词:  水静压轴承  空化气泡  减阻  静态特性  微形貌
英文关键词:water-lubricated hydrostatic bearing  cavitation bubble  drag-reduction  static characteristic  microtopography
基金项目:江南大学自主科研计划青年基金项目(JUSRP11526)
作者单位
蒋红琰 江苏科技大学 机电与动力工程学院,江苏 张家港 215600 
陈家俊 江苏科技大学 机电与动力工程学院,江苏 张家港 215600 
AuthorInstitution
JIANG Hong-yan School of Mechatronic and Power Engineering, Jiangsu University of Science and Technology, Zhangjiagang 215600, China 
CHEN Jia-jun School of Mechatronic and Power Engineering, Jiangsu University of Science and Technology, Zhangjiagang 215600, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了提高水轴承高速下的减阻效果以及预测水轴承的空蚀区域,研究了高速水静压轴承的空化与减阻性能。 方法 基于低雷诺数 Launder-Sharma 模型和空化气泡的动力学模型,分析了不同工作参数下水轴承的空化程度研究及微形貌特征对减阻效果的影响。 结果 空化气泡主要出现在静压轴承水腔之间的负压封水面及小孔节流器附近,空化气泡溃灭时容易造成轴承材料的空蚀破坏。 高速小偏心率时,相比流向和展向微形貌,凸柱微形貌特征表面具有较好的减阻效果,且减阻效果受轴颈线速度的影响较大。 结论 转速、供水压力和偏心率等物理参数影响水静压轴承空化气泡分布和静态性能,微形貌界面的速度滑移有利于提高减阻效果。
英文摘要:
      The woks aims to improve the drag reduction effects of water-lubricated hydrostatic bearing at high speed and predict the cavitation erosion area of the bearing by studying the cavitation and drag-reduction performance. A low-Re k-epsilon model allowing for cavitation was built based on Launder-Sharma Model and the Rayleigh-Plesset equation in order to analyze the influence of cavitation and microtopography of high-speed water-lubricated hydrostatic bearing on drag-reduction effects under different working parameters. Cavitation bubbles mainly appeared in vacuum water sealing suface between water cavities of hydrostatic bearing and near a restrictor orifice, which easily caused cavitation damage to bearing materials. At high speed and small eccentricity, compared with flow direction and spanwise microtopography, column-grooved microtopographic surface had better remarkable drag reduction effect among the three grooved surfaces, and the linear velocities of journal had significant influence on drag-reduction rate. Bearing parameters such as speed, supply pressure, eccentricity ratio can influence the distribution and static property of cavitation bubbles in water-lubricated hydrostatic bearing. In addition, obvious velocity slip contributes to improving drag reduction effect.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19500259位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号