裴锋,胡孝涛,田旭,刘欣,刘志雷,刘光明,李多生,黄健航,刘文杰.聚苯胺接枝石墨的制备及性能测试[J].表面技术,2016,45(9):228-232.
PEI Feng,HU Xiao-tao,TIAN Xu,LIU Xin,LIU Zhi-lei,LIU Guang-ming,LI Duo-sheng,HUANG Jian-hang,LIU Wen-jie.Preparation and Properties of Polyaniline Grafted onto Graphite[J].Surface Technology,2016,45(9):228-232
聚苯胺接枝石墨的制备及性能测试
Preparation and Properties of Polyaniline Grafted onto Graphite
投稿时间:2016-03-05  修订日期:2016-09-20
DOI:10.16490/j.cnki.issn.1001-3660.2016.09.034
中文关键词:  石墨  聚苯胺  接枝  硅烷偶联剂  电阻率  针状
英文关键词:graphite  polyaniline  grafted  silane coupling agent  electrical resistivity  needle
基金项目:国家电网江西省电力科学院资助项目(SGTYHT/14-JS-190)
作者单位
裴锋 国网江西省电力科学研究院,南昌 330096 
胡孝涛 南昌航空大学 材料科学与工程学院,南昌 330063 
田旭 国网江西省电力科学研究院,南昌 330096 
刘欣 国网江西省电力科学研究院,南昌 330096 
刘志雷 南昌航空大学 材料科学与工程学院,南昌 330063 
刘光明 南昌航空大学 材料科学与工程学院,南昌 330063 
李多生 南昌航空大学 材料科学与工程学院,南昌 330063 
黄健航 南昌航空大学 材料科学与工程学院,南昌 330063 
刘文杰 南昌航空大学 材料科学与工程学院,南昌 330063 
AuthorInstitution
PEI Feng Jiangxi Electric Power Research Institute, Nanchang 330096, China 
HU Xiao-tao  
TIAN Xu Jiangxi Electric Power Research Institute, Nanchang 330096, China 
LIU Xin Jiangxi Electric Power Research Institute, Nanchang 330096, China 
LIU Zhi-lei Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330000, China 
LIU Guang-ming Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330000, China 
LI Duo-sheng Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330000, China 
HUANG Jian-hang Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330000, China 
LIU Wen-jie Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330000, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 通过石墨表面的原位接枝反应制备聚苯胺接枝改性石墨(GO-g-PANI)。方法 首先对鳞片石墨进行氧化,然后利用表面的羟基与硅烷偶联剂KH550反应在其表面引入胺基,进而接枝聚苯胺,制备聚苯胺接枝改性石墨(GO-g-PANI)。通过FTIR、SEM、四探针导体/半导体电阻率测试仪进行表征,并将其作为导电填料制备导电涂料。结果 在苯胺与石墨不同的比例下,产率都在92%以上,并且当石墨与苯胺质量比为3:1时,在石墨表面生长出针状聚苯胺,其形成的复合材料的电阻率最低,为12.8 Ω∙mm。当此改性石墨在固膜含量为30%(质量分数)时涂料的综合性能最佳。结论 聚苯胺可以通过原位反应接到石墨上,并且能够改善氧化石墨的导电性能,在导电材料、电磁屏蔽材料方面具有潜在的应用前景。
英文摘要:
      Objective To prepare polyaniline modified graphite (GO-g-PANI) through the in situ grafting reaction onto graphite surface. Methods Firstly the flake graphite was oxidized. Then amino group was introduced by reaction between hydroxy and silane coupling agent (KH550). The products were characterized by FTIR, SEM and resistivity tester and was used as conductive filler to prepare conductive coatings. Results The grafting yields were all over 92% under different proportions between aniline and graphite. When the weight ratio of graphite and aniline was 3∶1, needle polyaniline was formed on the graphite surface, and the resistivity value of the formed composite material reached the lowest value 12.8 Ω∙mm. When the content of the modified graphite was 30%, the comprehensive performance of the coating was the best. Conclusion Polyaniline can graft onto graphite by the in situ reaction, and can improve the conductive properties of graphite oxide, and has potential applications in conductive materials and electromagnetic shielding materials.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19514068位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号