张娟利,黄勇,张新庄,王仙仙,杨天华.低比例甲醇汽油对金属的腐蚀研究[J].表面技术,2016,45(8):34-39.
ZHANG Juan-li,HUANG Yong,ZHANG Xin-zhuang,WANG Xian-xian,YANG Tian-hua.Corrosion of Low Proportional Methanol Gasoline on Metal[J].Surface Technology,2016,45(8):34-39
低比例甲醇汽油对金属的腐蚀研究
Corrosion of Low Proportional Methanol Gasoline on Metal
投稿时间:2016-04-22  修订日期:2016-08-20
DOI:10.16490/j.cnki.issn.1001-3660.2016.08.006
中文关键词:  甲醇汽油  金属腐蚀  腐蚀机理  腐蚀度  缓蚀剂
英文关键词:methanol gasoline  corrosion of metals  corrosion mechanism  degree of corrosion  corrosion inhibitors
基金项目:陕西延长石油(集团)有限责任公司项目(ycsy2015ky-B-20)
作者单位
张娟利 陕西延长石油(集团)有限责任公司研究院,西安 710075 
黄勇 陕西延长石油(集团)有限责任公司研究院,西安 710075 
张新庄 陕西延长石油(集团)有限责任公司研究院,西安 710075 
王仙仙 陕西延长石油(集团)有限责任公司研究院,西安 710075 
杨天华 陕西延长石油(集团)有限责任公司研究院,西安 710075 
AuthorInstitution
ZHANG Juan-li Research Institute of ShaanxiYanchang Petroleum (Group) Co., Ltd, Xi′an 710075, China 
HUANG Yong Research Institute of ShaanxiYanchang Petroleum (Group) Co., Ltd, Xi′an 710075, China 
ZHANG Xin-zhuang Research Institute of ShaanxiYanchang Petroleum (Group) Co., Ltd, Xi′an 710075, China 
WANG Xian-xian Research Institute of ShaanxiYanchang Petroleum (Group) Co., Ltd, Xi′an 710075, China 
YANG Tian-hua Research Institute of ShaanxiYanchang Petroleum (Group) Co., Ltd, Xi′an 710075, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 减轻甲醇汽油的腐蚀性。方法 以汽车油路系统常用的紫铜、黄铜、钢、铁、铝等金属材质为研究对象,采用金属试片的腐蚀度和颜色变化相结合的方法,分析判断甲醇汽油的腐蚀性,通过考察不同金属试片在不同含量甲醇汽油、含水甲醇汽油以及添加缓蚀剂甲醇汽油中的腐蚀情况,分析甲醇汽油腐蚀的主要原因,并根据缓蚀机理筛选缓蚀剂。结果 低比例甲醇汽油对不同金属材质都有明显的腐蚀作用,与93#汽油相比,加入5%(体积分数)的甲醇就能使紫铜、黄铜、钢、铝的腐蚀度增加一倍以上。少量水分可加剧甲醇汽油的腐蚀,但当水含量达到一定程度时,腐蚀度减小。缓蚀剂B对铜系金属材质的腐蚀有较好的抑制作用,缓蚀剂C对铁片腐蚀有较好的抑制作用,复配缓蚀剂H对所选金属材质都有良好的缓蚀效果,可使紫铜、黄铜、铁和铝的缓蚀率分别减小82.1%、81.5%、85.3%和89.5%。结论 复配的缓蚀剂能够有效地减缓甲醇汽油对金属的腐蚀。
英文摘要:
      Objective In order to mitigate the corrosion of methanol gasoline. Methods Commonly used metal materials such as copper, brass, iron, steel and aluminum in the automotive oil system were studied as the objects. A method combining degree of metal corrosion and color change was developed to determine corrosion performance of methanol gasoline. The corrosion effects of metal slice immersed in methanol gasoline with different contents, water-added methanol gasoline and inhibitor-added methanol gasoline were investigated. Main reasons for corrosion in methanol gasoline were analyzed. Corrosion inhibitor was screened according to corrosion mechanism. Results Low proportional methanol gasoline had obvious corrosion effect on all kinds of metal materials. Compared with 93# gasoline, addition of 5% methanol would double the degree of corrosion for copper, brass, iron, steel and aluminum. Adding small amounts of water would exacerbate corrosion of methanol gasoline. But when the water content reached a certain level, the degree of corrosion became less. Inhibitor B had a good corrosion inhibition effect on copper-based metal material, while inhibitor C had a good corrosion inhibition effect on iron-based metal material. Combined inhibitor H had a good corrosion inhibition effect on all selected metal materials, which could reduce the corrosion rates of copper, brass, iron and aluminum by 82.1%, 81.5%, 85.3% and 89.5% respectively. Conclusion Combined inhibitor can effectively reduce the corrosion of methanol gasoline on metal materials.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19926065位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号