唐爱贵,王晓雷.电泳-电沉积 Ni-PTFE 复合镀层及其摩擦学行为研究[J].表面技术,2015,44(5):67-71,135.
TANG Ai-gui,WANG Xiao-lei.Research on the Ni-PTFE Composite Coating Prepared by Electrophoretic-Electrochemical Deposition and Its Tribological Behavior[J].Surface Technology,2015,44(5):67-71,135
电泳-电沉积 Ni-PTFE 复合镀层及其摩擦学行为研究
Research on the Ni-PTFE Composite Coating Prepared by Electrophoretic-Electrochemical Deposition and Its Tribological Behavior
投稿时间:2014-11-24  修订日期:2015-05-20
DOI:10.16490/j.cnki.issn.1001-3660.2015.05.013
中文关键词:  Ni-PTFE 复合镀层  电泳  电沉积  摩擦磨损
英文关键词:Ni-PTFE composite coating  electrophoresis  electrodeposition  friction and wear
基金项目:教育部博士点基金(20123218110018)
作者单位
唐爱贵 南京航空航天大学 江苏省精密与微细制造技术重点实验室, 南京 210016 
王晓雷 南京航空航天大学 江苏省精密与微细制造技术重点实验室, 南京 210016 
AuthorInstitution
TANG Ai-gui Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology,Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China 
WANG Xiao-lei Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology,Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 制备具有优良自润滑性能的 Ni-PTFE 复合镀层,同时探究其摩擦学性能。 方法 首先在铜基体表面电泳沉积一层 PTFE 膜,再将覆有 PTFE 膜的基体放入光亮镀镍溶液中进行电沉积(电泳-电沉积法),用 SEM 附带的能谱仪检测复合镀层的 PTFE 复合量,同时在自制的销盘摩擦磨损实验机上进行相关的摩擦学实验,以评价其摩擦学性能。 结果 用电泳-电沉积法制备出了含量(以体积分数计) 达63. 4% 的 Ni-PTFE 复合镀层。 在干摩擦条件下,PTFE 微粒的加入可以降低复合镀层的摩擦系数(最低至0. 067)。 结论 高 PTFE 复合量的复合镀层具有良好的耐磨性能。
英文摘要:
      Objective To prepare Ni-PTFE composite coatings with excellent self-lubricating property, and to explore its tribological performance. Methods First, a layer of PTFE membrane was deposited on the surface of the copper matrix by electrophoretic deposition, and then the matrix with a layer of PTFE membrane was put into the bright nickel plating solution for electrodeposition (electrophoresis-electrodeposition method). SEM with EDS was used to detect the PTFE contents of the composite coating. At the same time, related tribological experiments were conducted on a self-developed pin disk friction tester, so as to evaluate its tribological performance. Results Using the electrophoresis-electrodeposition method, composite coatings with 63. 4% Ni-PTFE were prepared. The addition of PTFE particles could decrease the friction coefficient of the composite coating (minimum 0. 067) under dry friction condition. Conclusion The composite coating with high content of PTFE had good wear resistance.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19946903位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号