徐兴龙,周好斌,袁森.脉冲电流与直流电流的阴极保护效果比较研究[J].表面技术,2015,44(1):133-135,140.
XU Xing-long,ZHOU Hao-bin,YUAN Sen.Comparative Study on the Cathodic Protection Effect of Pulse Current and Direct Current[J].Surface Technology,2015,44(1):133-135,140
脉冲电流与直流电流的阴极保护效果比较研究
Comparative Study on the Cathodic Protection Effect of Pulse Current and Direct Current
投稿时间:2014-09-30  修订日期:2015-01-20
DOI:
中文关键词:  脉冲电流  阴极保护  保护电位  保护电流  保护度
英文关键词:pulsed current  cathodic protection  protection potential  protection current  protective property
基金项目:陕西省科技统筹创新工程计划项目(2013KTCL-04)
作者单位
徐兴龙 西安石油大学 材料科学与工程学院, 西安 710065 
周好斌 西安石油大学 材料科学与工程学院, 西安 710065 
袁森 西安石油大学 材料科学与工程学院, 西安 710065 
AuthorInstitution
XU Xing-long School of Material Science and Engineering, Xi'an Shiyou University, Xi'an 710065, China 
ZHOU Hao-bin School of Material Science and Engineering, Xi'an Shiyou University, Xi'an 710065, China 
YUAN Sen School of Material Science and Engineering, Xi'an Shiyou University, Xi'an 710065, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究对比脉冲电流与直流电流阴极保护效果。 方法 采用挂片法,在 NaCl 溶液中,对Q235 钢在电源输出电压为 4. 02 V(直流阴极保护电位为 0. 95 V)时,对比直流电流和脉冲电流阴极保护条件下的保护效果。 结果 电源输出功率相同时,脉冲电流可以获得更好的保护效果和较小的平均电流消耗;随着保护时间的推移,脉冲电流在不同参数条件下,阴极保护电位都会越来越负。 结论 高频率下,脉冲电流保护效果比直流电流的保护效果好;若要提高保护效果和降低电流消耗,应选择中间范围的占空比、较高的频率,并且优先调整频率。
英文摘要:
      Objective To study and compare the cathodic protection effect of pulse current and DC current. Methods The plate hanging method was used to contrast the cathodic protection effect of pulse current and DC current on Q235 steel in NaCl solution when the power output voltage was 4. 02 V (DC cathodic protection potential was 0. 95 V). Results Under the same power output condition, pulse current had better protection effect and lower power consumption. As time went on, under different pulse current parameter conditions, the cathodic protection potential became more and more negative. Conclusion Under the terms of high frequency, pulse current had better protection effect than DC current. To simultaneously improve the protection effect and decrease the power consumption, middle range of duty ratio, high frequency and priority adjustment of frequency should be adopted.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19512967位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号