张宏杰,温茂远,侯振,里达.结晶器铜板涂层界面结合强度的测定[J].表面技术,2014,43(3):169-174.
ZHANG Hong-jie,WEN Mao-yuan,HOU Zhen,LI Da.Determination of Interface Bonding Strength of Casting Mold Coating[J].Surface Technology,2014,43(3):169-174
结晶器铜板涂层界面结合强度的测定
Determination of Interface Bonding Strength of Casting Mold Coating
投稿时间:2013-12-12  修订日期:2014-01-23
DOI:
中文关键词:  连铸机结晶器  铜合金  涂层  界面结合强度  结合力  测试方法
英文关键词:continuous casting mold  copper alloy  coating  the interface bonding strength  bonding stress  test methods
基金项目:
作者单位
张宏杰 鞍钢附属企业公司一炼钢冶金修造厂, 辽宁 鞍山 114000 
温茂远 鞍钢附属企业公司一炼钢冶金修造厂, 辽宁 鞍山 114000 
侯振 鞍钢附属企业公司一炼钢冶金修造厂, 辽宁 鞍山 114000 
里达 鞍钢附属企业公司一炼钢冶金修造厂, 辽宁 鞍山 114000 
AuthorInstitution
ZHANG Hong-jie No. 1 Metallurgy Mechanical Repairing Plant of Ansteel Group, Anshan 114000, China 
WEN Mao-yuan No. 1 Metallurgy Mechanical Repairing Plant of Ansteel Group, Anshan 114000, China 
HOU Zhen No. 1 Metallurgy Mechanical Repairing Plant of Ansteel Group, Anshan 114000, China 
LI Da No. 1 Metallurgy Mechanical Repairing Plant of Ansteel Group, Anshan 114000, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 准确测定结晶器铜板涂层的界面结合强度。 方法 考虑到结晶器铜板的涂层属于厚韧性涂层 / 韧性基体材料体系,宜采用标准的剪切法定量测量其界面结合强度。 推荐井玉安等设计的涂层宽度为 1 mm 的剪切试样及专用模具,并通过该方法测试铜合金基材、电镀层 / 铜合金、喷涂层 / 铜合金的界面结合强度。 结果 测得的铜合金基材的剪切强度离散系数最小;各类涂层的结合强度值离散性与GB / T 13222—1991 方法测出的数据相比,相对较小。 结论 推荐的测试方法较 GB / T 13222—1991 方法准确度高,适合于结晶器铜板涂层的结合强度测试,且测试时宜先测铜合金基材的剪切强度,以有效减小试验的系统误差。
英文摘要:
      Objective To accurately determine the interface bonding strength between coating and mold copper. Methods Considering that the casting mold coating belongs to a kind of thick, tough coating & toughness-based material, a standard shearing strength test method was used to measure its interface bonding strength. It was suggested to measure the bonding strength on coating interface using the series of specific mold with a sample of 1 millimeter in width as established by Mr. Jing Yu-an. Then interface bonding strength of the copper, electroplate layer / copper alloy, spray layer / copper alloy were researched. Results By testing and analyzing, the variance coefficient of shearing strength for copper was the lowest and the variance coefficients measured using Jing' s method were lower than those measured with GB 13222—1991 for all kinds of layers. Conclusion The veracity of Jing's method was better than that of GB 13222—1991 and it was more suitable for testing the bonding strength of mold copper coating. In order to reduce system errors, the copper's shearing strength must be tested at first.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20472302位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号