陈郁栋,曾志翔,彭叔森,乌学东,薛群基.苯胺三聚体固化环氧树脂制备防腐蚀涂层及其性能研究[J].表面技术,2014,43(3):158-162.
CHEN Yu-dong,ZENG Zhi-xiang,PENG Shu-sen,WU Xue-dong,XUE Qun-ji.Preparation and Properties of Epoxy Resin Anticorrosive Coating Cured by Aniline Trimer[J].Surface Technology,2014,43(3):158-162
苯胺三聚体固化环氧树脂制备防腐蚀涂层及其性能研究
Preparation and Properties of Epoxy Resin Anticorrosive Coating Cured by Aniline Trimer
投稿时间:2014-03-18  修订日期:2014-04-03
DOI:
中文关键词:  苯胺  防腐蚀  环氧树脂  苯胺三聚体
英文关键词:aniline  anticorrosion  epoxy resin  aniline trimer
基金项目:国家自然科学基金资助项目(51105356,51335010)
作者单位
陈郁栋 中国科学院宁波材料技术与工程研究所 中国科学院海洋新材料与应用技术重点实验室浙江省海洋材料与防护技术重点试验, 浙江 宁波 315201;中国科学院大学, 北京 100049 
曾志翔 中国科学院宁波材料技术与工程研究所 中国科学院海洋新材料与应用技术重点实验室浙江省海洋材料与防护技术重点试验, 浙江 宁波 315201 
彭叔森 中国科学院宁波材料技术与工程研究所 中国科学院海洋新材料与应用技术重点实验室浙江省海洋材料与防护技术重点试验, 浙江 宁波 315201 
乌学东 中国科学院宁波材料技术与工程研究所 中国科学院海洋新材料与应用技术重点实验室浙江省海洋材料与防护技术重点试验, 浙江 宁波 315201 
薛群基 中国科学院宁波材料技术与工程研究所 中国科学院海洋新材料与应用技术重点实验室浙江省海洋材料与防护技术重点试验, 浙江 宁波 315201 
AuthorInstitution
CHEN Yu-dong Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China;University of Chinese Academy of Sciences, Beijing 100049, China 
ZENG Zhi-xiang Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
PENG Shu-sen Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
WU Xue-dong Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
XUE Qun-ji Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 考查苯胺三聚体( AT) 添加量对涂层防腐蚀性能的影响。 方法 自制苯胺三聚体,以苯胺三聚体和异佛尔酮二胺( IPD) 为共固化剂,制备环氧涂层。 对苯胺三聚体的化学结构进行表征,对涂层的表面微观形貌进行??通过电化学手段及盐雾实验评价涂层的防腐蚀效果。 结果 苯胺三聚体的加入使得环氧树脂涂层的防腐蚀性能有明显提升,并且苯胺三聚体的含量越高,涂层防腐蚀效果越好。对于不加传统固化剂的涂层,由于固化效?患?会导致防腐性能骤减。 结论 使用 AT 与 IPD 共固化环氧树脂涂层,当固化剂中 AT 的摩尔分数为 80% 时,涂层具有最佳的性能。
英文摘要:
      Objective To study the influence of the amount of aniline trimer on the corrosion resistance of the coating. Methods Epoxy coating was cured by aniline trimer ( AT) and isophorone dianime ( IPD) . The chemical structure of aniline trimer was characterized by IR and NMR. The surface morphology of coating was observed by SEM. The anticorrosion ability of the coating was evaluated by electrochemical method and salt spray test. Results The anticorrosion ability of the coating was improved by the addition of AT, and the anticorrosion ability increased with the increasing AT content. However, curing by solely AT destroyed the structure of the coating which reduced the anticorrosion effect. Conclusion The results demonstrated that the best anticorrosion ability was obtained when the weight ratio of AT / IPD was 4 : 1.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19955425位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号