张蕾,陈群志,刘慧丛,朱立群.飞机外部 IMR21 纳米复合涂层在典型加速腐蚀环境中的腐蚀失效行为[J].表面技术,2014,43(2):36-41.
ZHANG Lei,CHEN Qun-zhi,LIU Hui-cong,ZHU Li-qun.Corrosion Failure Behavior of IMR21 Nano Composite Coating on Airplane in Typical Accelerated Corrosion Environment[J].Surface Technology,2014,43(2):36-41
飞机外部 IMR21 纳米复合涂层在典型加速腐蚀环境中的腐蚀失效行为
Corrosion Failure Behavior of IMR21 Nano Composite Coating on Airplane in Typical Accelerated Corrosion Environment
投稿时间:2013-12-17  修订日期:2014-01-25
DOI:
中文关键词:  IMR21 纳米复合涂层  典型加速腐蚀环境  腐蚀失效行为  聚氨酯面漆涂层  飞机外部结构件
英文关键词:IMR21 nano composite coating  typical accelerated corrosion environment  corrosion fatigue behavior  polyurethane paint coating  simulated samples of the airplane external structure
基金项目:
作者单位
张蕾 北京航空工程技术研究中心, 北京 100076 
陈群志 北京航空工程技术研究中心, 北京 100076 
刘慧丛 北京航空航天大学, 北京 100191 
朱立群 北京航空航天大学, 北京 100191 
AuthorInstitution
ZHANG Lei Beijing Aeronautical Technology Research Center, Beijing 100076, China 
CHEN Qun-zhi Beijing Aeronautical Technology Research Center, Beijing 100076, China 
LIU Hui-cong Beihang University, Beijing 100191, China 
ZHU Li-qun Beihang University, Beijing 100191, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究 IMR 纳米复合涂层对飞机外部结构件的防护性能。 方法 对比考察典型加速腐蚀环境条件下,飞机外部结构模拟件表面聚氨酯面漆涂层和 IMR21 纳米复合涂层的腐蚀失效行为。 结果在经过 2 个阶段各 8 个周期的加速腐蚀后,模拟件涂层表面均出现了鼓包、开裂、剥落等现象,而且涂层在第二阶段的腐蚀程度略重于第一阶段。 与聚氨酯面漆涂层相比,IMR21 纳米复合涂层的腐蚀失效程度要低很多,说明该纳米复合涂层具有优良的抗环境腐蚀性能。 结论 可考虑在飞机结构制造、大修以及外场维护中采用 IMR21 纳米复合涂层进行表面防腐涂装处理。
英文摘要:
      Objective To study the protection property of the IMR21 nano composite coating on the airplane external structure in comparison with the polyurethane paint coating. Methods Corrosion failure behavior of the IMR21 nano composite coating and the polyurethane paint coating on simulated samples of the airplane external structure were investigated in typical accelerated corrosion environment. Results After accelerated corrosion for two stages of eight cycles in typical accelerated corrosion environment,bumps, cracks and exfoliation occurred on the coating surface. Compared with the polyurethane paint coating, there was less corrosion for the IMR21 nano composite coating. And the coating was corroded more seriously in the first stage than the second stage. Conclusion The results showed that the anti-corrosion property of the nano composite coating is excellent, and is hopefully to be used in the surface coating for anti-corrosion purpose in the processing and manufacturing, repairing and maintaining of the airplane external structure.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19513036位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号