张馥,石磊,张明晓,张琦,许峰源,王光明,扈宝国,杨亚文.电镀锌铁合金工艺及光亮剂的研究[J].表面技术,2013,42(4):79-82.
ZHANG Fu,SHI Lei,ZHANG Ming-xiao,ZHANG Qi,XU Feng-yuan,WANG Guang-ming,HU Bao-guo,YANG Ya-wen.Research on Electric Galvanized Iron Alloy Process and Brightener[J].Surface Technology,2013,42(4):79-82
电镀锌铁合金工艺及光亮剂的研究
Research on Electric Galvanized Iron Alloy Process and Brightener
投稿时间:2013-01-31  修订日期:2013-03-25
DOI:
中文关键词:  电镀  硫酸盐  锌铁合金  光亮剂
英文关键词:plating  sulfate  zinc alloy  additive
基金项目:住房和城乡建设部科学技术项目计划(2012-K4-40)
作者单位
张馥 朝阳师范高等专科学校 生化工程系, 朝阳 122000 
石磊 山东建筑大学 材料科学与工程学院, 济南 250101 
张明晓 山东建筑大学 材料科学与工程学院, 济南 250101 
张琦 山东建筑大学 材料科学与工程学院, 济南 250101 
许峰源 山东建筑大学 材料科学与工程学院, 济南 250101 
王光明 山东建筑大学 材料科学与工程学院, 济南 250101 
扈宝国 山东建筑大学 材料科学与工程学院, 济南 250101 
杨亚文 山东建筑大学 材料科学与工程学院, 济南 250101 
AuthorInstitution
ZHANG Fu Department of Biochemical Engineering, Chaoyang Teachers College, Chaoyang 122000 , China 
SHI Lei Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
ZHANG Ming-xiao Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
ZHANG Qi Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
XU Feng-yuan Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
WANG Guang-ming Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
HU Bao-guo Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
YANG Ya-wen Academy of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      介绍了一种硫酸盐电镀锌铁合金工艺及新型光亮剂。 研究了镀液中 FeSO4 ·7 H2O 浓度、锌铁总离子浓度、光亮剂用量、阴极电流密度、pH 值、温度等因素对镀层含铁量的影响。 结果表明:随着镀液中锌铁总离子浓度和温度的升高,镀层的含铁量降低;随着阴极电流密度和 pH 值的增大,镀层的含铁量先增加,后降低;随着 FeSO4 ·7 H2O 浓度的升高,镀层的含铁量增加。 探讨了新型光亮剂对镀层的影响,获得了最佳电镀方案。
英文摘要:
      A sulfate Zn-Fe alloy electroplating process and new brightener was described, and the influences of ion concentration of plating, mass concentration of FeSO4 ·7 H2O, dosage of brightener, cathode current density, pH, temperature on the surface of coating and iron content were discussed. The results showed that the mass fraction of iron in the coating decreases as the ion concentration of zinc and iron as well as temperature increased. As the incrase of cathode current density as well as pH it increase first , when reaching a value the mass fraction Fe in the coating increases with their mass fraction decreases.It incrases as the increase of the concentration of FeSO4 ·7 H2O. The article found out the optimum plating and explored the influence of new brightener on the coating.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20084558位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号