郝康达,苗景国,陈秋荣,董香芸,吴润,卫中领.铝酸钠浓度对 7075 铝合金微弧氧化膜层特性的影响[J].表面技术,2013,42(3):49-51,55.
HAO Kang-da,MIAO Jing-guo,CHEN Qiu-rong,DONG Xiang-yun,WU Run,WEI Zhong-ling.Effect of Sodium Aluminate Concentration on Properties of Micro-arc Oxidation Coatings on Aluminum Alloy 7075[J].Surface Technology,2013,42(3):49-51,55
铝酸钠浓度对 7075 铝合金微弧氧化膜层特性的影响
Effect of Sodium Aluminate Concentration on Properties of Micro-arc Oxidation Coatings on Aluminum Alloy 7075
投稿时间:2013-01-09  修订日期:2013-02-20
DOI:
中文关键词:  铝酸钠  微弧氧化  形貌
英文关键词:sodium aluminate  micro-arc oxidation  morphology
基金项目:
作者单位
郝康达 武汉科技大学 材料与冶金学院, 武汉 430081 
苗景国 武汉科技大学 材料与冶金学院, 武汉 430081;嘉兴南洋职业技术学院 机电工程系, 嘉兴 314003 
陈秋荣 中国科学院嘉兴轻合金技术工程中心, 嘉兴 314006;嘉兴中科亚美合金技术有限责任公司, 嘉兴 314006 
董香芸 武汉科技大学 材料与冶金学院, 武汉 430081 
吴润 武汉科技大学 材料与冶金学院, 武汉 430081 
卫中领 中国科学院嘉兴轻合金技术工程中心, 嘉兴 314006 
AuthorInstitution
HAO Kang-da Materials and Metallurgy College,Wuhan University of Science and Technology,Wuhan 430081, China 
MIAO Jing-guo Materials and Metallurgy College,Wuhan University of Science and Technology,Wuhan 430081, China;Department of Mechanical and Electrical Engineering, Jiaxing Nanyang Vocational Technology College, Jiaxing 314003, China 
CHEN Qiu-rong Jiaxing Light Alloys Technology and Engineering Centre, Chinese Academy of Sciences, Jiaxing 314006 , China;Jiaxing Zhongke Asia Magnesium Technology Co. , Ltd. , Jiaxing 314006 , China 
DONG Xiang-yun Materials and Metallurgy College,Wuhan University of Science and Technology,Wuhan 430081, China 
WU Run Materials and Metallurgy College,Wuhan University of Science and Technology,Wuhan 430081, China 
WEI Zhong-ling Jiaxing Light Alloys Technology and Engineering Centre, Chinese Academy of Sciences, Jiaxing 314006 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      选用铝酸钠体系对 7075 铝合金进行微弧氧化处理。 对不同铝酸钠浓度下制备出的膜层厚度及显微硬度进行测试,并借助扫描电镜及金相显微镜对膜层微观形貌进行分析。 结果表明:不同铝酸钠浓度下制备出的膜层均呈“ 火山喷射口冶 状凸起形貌,与基体之间呈微区范围内的锯齿状冶金结合,膜层连续均匀,铝酸钠质量浓度为 9 g / L 时,膜层显微硬度高达 1080 HV0 . 1 。
英文摘要:
      Applying the technology of micro-arc oxidation to form ceramic coatings on aluminum alloy 7075 . The thickness and micro-hardness values of coatings in different concentration of sodium aluminate were tested, and morphology of surface and cross-section of coatings were observed by using scanning electron microscope ( SEM) and metallographic microscope. Results showed that, embossments like " volcanic vent " were presented on the surface of MAO coatings prepared in different sodium aluminate concentration. In addition, metallurgical bonding mode like zigzag was observed between coating and substrate, coatings were continuous and symmetrical with micro-hardness of 1080 HV0 . 1 .
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19516080位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号