邱建春,何卫锋,谭哲豪,李克天.真空喷涂生产线的缸体结构设计及有限元分析[J].表面技术,2013,42(2):122-125. QIU Jian-chun,HE Wei-feng,TAN Zhe-hao,LI Ke-tian.The Design and Finite Element Analysis of Cylinder Structural in Vacuum Coating Production Line[J].Surface Technology,2013,42(2):122-125 |
真空喷涂生产线的缸体结构设计及有限元分析 |
The Design and Finite Element Analysis of Cylinder Structural in Vacuum Coating Production Line |
投稿时间:2012-12-13 修订日期:2013-02-01 |
DOI: |
中文关键词: 真空喷涂 真空缸 薄壁圆筒 有限元 |
英文关键词:vacuum painting vacuum cylinder thin-walled cylinder finite element |
基金项目:省部产学研结合项目(2012B091000011) |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
简述了真空喷涂生产线缸体的结构及工作原理,并对缸体结构进行设计。 首先,依据薄壁圆筒稳定性理论对真空缸体进行初步设计;然后,利用有限元对真空缸体三维模型进行仿真,分析其具体变形情况与应力分布规律,从而判断缸体的强度性能与安全稳定性;最后,对缸体的结构进行改进以满足设计要求。 |
英文摘要: |
The cylinder structure and principle of vacuum coating production line were described and the structure of cylinder was designed. First, completed the preliminary design of vacuum cylinder based on the stability theory about thinwalled cylinder; Then the finite element model of vacuum cylinder was simulated to analyze its specific deformation and stress distribution law, determine the strength and security stability of the vacuum cylinder. Finally, improved its structure in order to meet the design requirements. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|