董晨竹,刑斌赛,郝杰,余龙芬,高玉新,方淳.电火花沉积 Fe 基涂层的组织及耐磨性能[J].表面技术,2013,42(2):37-39.
DONG Chen-zhu,XING Bin-sai,HAO Jie,YU Long-fen,GAO Yu-xin,FANG Chun.Microstructure and Wear Properties of Fe-based Coating Prepared by Electrospark Deposition[J].Surface Technology,2013,42(2):37-39
电火花沉积 Fe 基涂层的组织及耐磨性能
Microstructure and Wear Properties of Fe-based Coating Prepared by Electrospark Deposition
投稿时间:2012-10-19  修订日期:2012-11-20
DOI:
中文关键词:  电火花沉积  Fe 基合金涂层  显微组织  耐磨性能
英文关键词:ESD  Fe-based alloy coating  microstructure  wear properties
基金项目:浙江省大学生科技计划项目(2011R428020) ;浙江省科技计划项目(2012C21107)
作者单位
董晨竹 台州学院 机械工程学院, 台州 318000 
刑斌赛 台州学院 机械工程学院, 台州 318000 
郝杰 台州学院 机械工程学院, 台州 318000 
余龙芬 台州学院 机械工程学院, 台州 318000 
高玉新 台州学院 机械工程学院, 台州 318000 
方淳 台州学院 机械工程学院, 台州 318000 
AuthorInstitution
DONG Chen-zhu College of Mechanical Engineering, Taizhou University, Taizhou 318000 , China 
XING Bin-sai College of Mechanical Engineering, Taizhou University, Taizhou 318000 , China 
HAO Jie College of Mechanical Engineering, Taizhou University, Taizhou 318000 , China 
YU Long-fen College of Mechanical Engineering, Taizhou University, Taizhou 318000 , China 
GAO Yu-xin College of Mechanical Engineering, Taizhou University, Taizhou 318000 , China 
FANG Chun College of Mechanical Engineering, Taizhou University, Taizhou 318000 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      通过电火花沉积技术在 P20 模具钢表面制备了 Fe 基涂层,利用 SEM,XRD 及摩擦磨损试验机等分析了涂层的组织结构、显微硬度及耐磨性能。 结果表明:电火花沉积 Fe 基涂层组织均匀、致密;涂层中靠近界面处的组织为柱状枝晶,而涂层中上部组织为超细晶粒。 涂层的平均硬度为 637 . 1 HV0 . 1 ,相比基体提高了 1 倍;涂层耐磨性优于基体,涂层中弥散分布的 Cr7C3,CrB 及 Fe3C 等硬质是 Fe 基涂层硬度及耐磨性提高的主要原因。涂层的磨损机理主要为磨粒磨损的微切削和疲劳磨损。
英文摘要:
      The Fe-based alloy coating was produced on the surface of P20 steel plate by electro-spark deposition ( ESD) technique, and the microstructure and wear properties of the coating were investigated by SEM, XRD and friction and wear test machine. The results show that the coating has homogenous and dense structure with fine dendritic structure in the bottom of the coating and ultra-fine grains in the middle and upper coating. The average hardness of the coating is 637 . 1 HV0 . 1 .The wear resistance of the ESD coating is much higher than the substrate. Dispersion strengthening result from hard phases such as Cr7C3,CrB,Fe3C is the main factor leading to high hardness as well as wear resistance of the coating. The wear mechanism are mainly abrasive wear and fatigue wear.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19511322位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号