谭利华,叶福东,魏喆良.配位剂对黄铜中温化学镀 Ni-P 合金镀层的影响[J].表面技术,2013,42(2):26-30.
TAN Li-hua,YE Fu-dong,WEI Zhe-liang.Effects of Complexing Agent on Electroless Ni-P Plating onto Brass Surface at Medium Temperature[J].Surface Technology,2013,42(2):26-30
配位剂对黄铜中温化学镀 Ni-P 合金镀层的影响
Effects of Complexing Agent on Electroless Ni-P Plating onto Brass Surface at Medium Temperature
投稿时间:2012-10-27  修订日期:2012-12-07
DOI:
中文关键词:  黄铜  化学镀 Ni-P 合金  中温  复合配位剂
英文关键词:brass  electroless Ni-P plating  medium temperature  composite complexing agent
基金项目:福州大学科技发展基金资助项目(2011-XQ-013)
作者单位
谭利华 福州大学 机械工程及自动化学院, 福州 350108 
叶福东 福州大学 机械工程及自动化学院, 福州 350108 
魏喆良 福州大学 机械工程及自动化学院, 福州 350108 
AuthorInstitution
TAN Li-hua College of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108 , China 
YE Fu-dong College of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108 , China 
WEI Zhe-liang College of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      为解决传统高温化学镀鎳所存在的诸多问题,在中温(70 益 ) 酸性条件下,以硫酸镍为主盐,次磷酸钠为还原剂,乙酸钠为缓冲剂,就乳酸、冰乙酸及二者复合的配位剂对黄铜中温化学镀 Ni-P 合金镀层性能的影响进行了研究。 结果表明:复合配位剂中的乳酸主要起配位剂的作用,冰乙酸主要起缓冲剂的作用;采用复合配位剂的镀液的沉积速率与采用单一配位剂的镀液相当,但稳定性好,镀层孔隙率低,乳酸 7 . 5 mL / L +冰乙酸 13 . 0mL / L 时所获得的镀层光亮平整,颗粒细小,均匀致密,且与基体结合良好,显微硬度可达 515 HV, 孔隙率低于 1cm-2,具有较好的耐磨性和耐蚀性。
英文摘要:
      To solve the problems of traditional high temperature electroless nickel plating process, the effect law of lactic acid, glacial acetic acid and composite complexing agent on electroless Ni-P plating on brass surface was studied by using nickel sulfate as main salt, sodium hypophosphite as reducing agent and sodium acetate as buffer agent in acidic nickel plating system at medium temperature(70 益 ) . The results show that, in the composite complexing agent, actic acid mainly plays the role of complexing agent, where as glacial acetic acid mainly plays the role of buffer. Meanwhile,compared with single complexing agent,composite complexing agent has the same deposition rate, but its bath stability and porosity of plating is better. A bright , smooth plating with dense appearance and combined well with the brass surface could be obtained with actic acid of 7 . 5 mL / L and glacial acetic acid of 13 mL / L. The hardness of coating can reach 515 HV and the porosity is lower than 1 cm-2, which exhibits coating had good abrasion resistance and corrosion resistance.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19941783位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号