李培林,炊明伟,王崴,徐晓东,刘晓卫.粗糙纹理表面数字化模拟[J].表面技术,2013,42(1):88-90,97.
LI Pei-lin,CHUI Ming-wei,WANG Wei,XU Xiao-dong,LIU Xiao-wei.Numerical Simulation of Rough Texture Surface[J].Surface Technology,2013,42(1):88-90,97
粗糙纹理表面数字化模拟
Numerical Simulation of Rough Texture Surface
投稿时间:2012-10-05  修订日期:2012-11-17
DOI:
中文关键词:  粗糙表面  纹理表面  数字化模拟  自相关函数
英文关键词:rough surface  texture surface  numerical simulation  autocorrelation function
基金项目:国家自然科学基金资助项目(51075395)
作者单位
李培林 空军工程大学 防空反导学院, 西安 710051 
炊明伟 空军工程大学 防空反导学院, 西安 710051 
王崴 空军工程大学 防空反导学院, 西安 710051 
徐晓东 空军工程大学 防空反导学院, 西安 710051 
刘晓卫 空军工程大学 防空反导学院, 西安 710051 
AuthorInstitution
LI Pei-lin School of Air and Missile Defense, Air Force Engineering University, Xi'an 710051 , China 
CHUI Ming-wei School of Air and Missile Defense, Air Force Engineering University, Xi'an 710051 , China 
WANG Wei School of Air and Missile Defense, Air Force Engineering University, Xi'an 710051 , China 
XU Xiao-dong School of Air and Missile Defense, Air Force Engineering University, Xi'an 710051 , China 
LIU Xiao-wei School of Air and Missile Defense, Air Force Engineering University, Xi'an 710051 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      粗糙表面的数字模拟是工件接触性能研究的前提与基础,而现有的粗糙表面模拟方法缺乏对表面纹理的考虑,为此提出了一种粗糙纹理表面数字化模拟方法。 该方法通过数字化滤波模拟生成设定自相关函数的粗糙表面,同时模拟生成设定纹理参数的纹理表面,对粗糙表面和纹理表面进行归一化处理后,通过对纹理表面添加比例因子,将两表面进行合成处理,得到最终的粗糙纹理表面。 通过模拟生成两种不同类型的粗糙纹理表面,表明提出的粗糙纹理表面数字化模拟方法能够准确模拟各种类型工件的表面形貌。
英文摘要:
      The numerical simulation of rough surface is research precondition and basis of contact capacity of engineering assemblies. Aim at the shortcoming in the simulation of rough surfaces, a new numerical simulation method of rough texture surface was proposed. The rough surface with desired auto-correlation function was simulated by the digital filter method, and the texture surface with desired parameters was simulated. After normalization of rough surface and texture surface, two surfaces were synthesized by adding the proportion coefficient in the texture surface, the rough texture surface was simulated. At last,two types of rough texture surfaces were simulated. It showed that the proposed method could simulate accurately all kinds of surfaces.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19497642位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号