谭利华,叶福东,魏喆良.镀液组成对黄铜表面中温化学镀Ni-P 合金的影响[J].表面技术,2012,(6):40-43.
TAN Li-hua,YE Fu-dong,WEI Zhe-liang.Effects of Bath Composition on Electroless Ni-P Plating onto Brass Surface at Medium Temperature[J].Surface Technology,2012,(6):40-43
镀液组成对黄铜表面中温化学镀Ni-P 合金的影响
Effects of Bath Composition on Electroless Ni-P Plating onto Brass Surface at Medium Temperature
投稿时间:2012-07-29  修订日期:2012-12-20
DOI:
中文关键词:  黄铜  化学镀Ni-P  中温  镀液
英文关键词:brass  electroless Ni-P plating  medium temperature  bath
基金项目:福州大学科技发展基金资助项目(2011-XQ-013)
作者单位
谭利华 福州大学机械工程及自动化学院, 福州350108 
叶福东 福州大学机械工程及自动化学院, 福州350108 
魏喆良 福州大学机械工程及自动化学院, 福州350108 
AuthorInstitution
TAN Li-hua College of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China 
YE Fu-dong College of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China 
WEI Zhe-liang College of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China 
摘要点击次数:
全文下载次数:
中文摘要:
      以硫酸镍为主盐,次磷酸钠为还原剂,乳酸+冰乙酸为复合络合剂,硫酸铵为加速剂,在酸性、中温(70 ℃) 条件下,采用化学镀法在黄铜表面镀覆Ni-P 合金镀层,并研究了主盐与还原剂的配比、络合剂和加速剂的用量对化学镀的影响规律,确定了镀液的最优配方。结果表明:硫酸镍与次磷酸钠的配比对沉积速率和镀层显微硬度均有较大的影响;复合络合剂中的乳酸主要起络合剂的作用,冰乙酸主要起缓冲剂的作用;添加硫酸铵可增加次磷酸根的活性,使沉积速率增大。
英文摘要:
      A electroless Ni-P plating was obtained on brass surface at medium temperature(70 ℃) in acidic nickel plating system by using nickel sulfate as main salt, sodium hypophosphite as reducing agent, lactic acid and glacial acetic acid as composite complexing agent and ammonium sulphate as accelerating agent. The effects of ratio of main salt and reducing agent,amount of complexing agent and accelerating agent on electroless plating were investigated. The optimal formula of bath was determined. The results show that the ratio of nickel sulfate and sodium hypophosphite significantly influence on deposition rate and hardness. In the composite complexing agent,actic acid mainly plays the role of complexing agent, where as glacial acetic acid mainly plays the role of buffer. Hypophosphite activity is enhanced by ammonium sulfate,which increases the deposition rate.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19495751位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号