顾伟.激光熔覆Ni 包Al+1%Y2 O3 覆层的组织分析[J].表面技术,2012,(6):22-25.
GU Wei.Analysis of Laser Cladding Ni Coated Al+1%Y2O3 Coating Organization[J].Surface Technology,2012,(6):22-25 |
| 激光熔覆Ni 包Al+1%Y2 O3 覆层的组织分析 |
| Analysis of Laser Cladding Ni Coated Al+1%Y2O3 Coating Organization |
| 投稿时间：2012-06-12 修订日期：2012-12-20 |
| DOI： |
| 中文关键词: Ni 包Al 激光熔覆 金属间化合物 熔覆层 组织结构 相结构 有序化 |
| 英文关键词:Ni-coated Al laser cladding intermetallic compounds cladding layer microstructure phase structure ordering |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 以Ni 包Al 粉末和少量Y2O3 粉末为原料,在20 钢基体表面激光熔覆Ni-Al 金属间化合物,获得了质量良好的熔覆层。运用光学显微镜、扫描电子显微镜分析了熔覆层的组织结构,利用能谱仪、X-ray 衍射仪分析了熔覆层的成分与相结构,研究了热处理对其组织、性能和有序化的影响。结果表明:熔覆层主要由Ni3Al,γ-(Fe,Al),NiAl,AlNiY 和Al2Y 等相组成,热处理后,Ni3Al 相由无序化转变成有序化,并且NiAl 相的有序化得以保留。 |
| 英文摘要: |
| Taking Ni+Al powder and a small amount of Y2 O3 powder as raw material, on the 20 steel surface the Ni-Al intermetallic compound was cladded by laser. The cladding layer with good quality was obtained. Using optical microscope,scanning electron microscope the microstructure of the cladding coating was analyzed. Using energy dispersive spectrometer, X- ray diffraction the composition and structure of cladding layer were analyzed. The effect of the heat treatment on the microstructure, properties and ordering was studied. The results show that the main phases of the cladding layer are Ni3 Al,γ-(Fe,Al),NiAl,AlNiY and Al2 Y. After heat treatment Ni3 Al phase is changed into ordering from disordering, while the NiAl phase ordering is to be retained. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号