李淑华.铸钛合金组合零件的阳极氧化工艺研究[J].表面技术,2012,(5):108-110.
LI Shu-hua.Process Study on Anodization for Cast Titanium Alloy Weldment[J].Surface Technology,2012,(5):108-110 |
| 铸钛合金组合零件的阳极氧化工艺研究 |
| Process Study on Anodization for Cast Titanium Alloy Weldment |
| 投稿时间：2012-04-22 修订日期：2012-10-20 |
| DOI： |
| 中文关键词: 钛合金 阳极氧化 焊接组合零件 正交试验 |
| 英文关键词:Ti-alloy anodization welding assembly orthogonal test |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 针对铸钛合金材料和焊接组合件的特点,优化铸钛合金组合零件的阳极氧化工艺。在普通钛合金阳极化工艺的基础上,采用正交试验优化了氧化时间、氧化溶液温度、氧化最终电压、氧化前处理酸腐蚀时间等工艺参数。验证试验及试生产结果表明,优化的工艺条件能够满足产品的质量要求。 |
| 英文摘要: |
| According to the characteristics of cast titanium alloy and welding assembly, the anodizing processes of cast titanium alloy weldments were optimized. On the basis of normal titanium alloy anodization, these process parameter such as anodization time, anodization solution temperature,anodization voltage and the acid corrosion time before anodization and so on for cast titanium alloy weldment were optimized. This conclusion shows that the optimized process conditions meet the demands of production quality. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号