黎成勇,朱紫棠,刘婷琛,余取民.磷化后免水洗的钡盐改性常温锌系磷化技术研究[J].表面技术,2012,(5):96-98,123.
LI Cheng-yong,ZHU Zi-tang,LIU Ting-chen,YU Qu-min.Study on Barium Modified Zinc Phosphating without Washing at Room Temperature[J].Surface Technology,2012,(5):96-98,123
磷化后免水洗的钡盐改性常温锌系磷化技术研究
Study on Barium Modified Zinc Phosphating without Washing at Room Temperature
投稿时间:2012-04-25  修订日期:2012-10-20
DOI:
中文关键词:  锌系磷化  钡盐改性  形貌  耐蚀性  免水洗
英文关键词:zinc phosphating  barium modify  morphology  corrosion resistance  without washing
基金项目:长沙市科技计划项目(K070761-31);长沙学院科技计划项目(SF080404)
作者单位
黎成勇 长沙学院,长沙410003 
朱紫棠 湖南湘江涂料集团有限公司,长沙410003 
刘婷琛 长沙学院,长沙410003 
余取民 长沙学院,长沙410003 
AuthorInstitution
LI Cheng-yong Changsha University, Changsha 410003, China 
ZHU Zi-tang Hunan Xiangjiang Paint Group Co., Ltd, Changsha 410003, China 
LIU Ting-chen Changsha University, Changsha 410003, China 
YU Qu-min Changsha University, Changsha 410003, China 
摘要点击次数:
全文下载次数:
中文摘要:
      Q235钢试片在由磷酸、氧化锌、硝酸钡、钼酸铵等组成的钡盐改性锌系磷化液中常温快速磷化后,自然干燥3h,生成了连续、致密的钡改性锌系磷化膜。对膜层的形貌和组成进行了分析,测定了磷化膜的膜质量、耐蚀性等。结果表明:在锌系磷化液中添加硝酸钡改性,适宜的Ba2+ 质量浓度为0.6g/L,可改善磷化膜的微观形貌和耐蚀性能;钡盐改性锌系磷化膜连续、致密,充满了1~2μm 的磷化膜晶体,喷涂铁红环氧底漆后,涂层附着力达1级。
英文摘要:
      Steel coupon(Q235)was phosphated quickly at room temperature by the barium modified zinc-system phosphating solution which is composed of H3PO4,ZnCl2,(NH4)6 Mo7O24·4H2O and so on reacted with each other. It was dried for 3h to produce dense phosphating film. The morphology and element contents of the films were analyzed. The film quality and corrosion resistance of phosphating film were determined. The results show that the morphology and corrosion resistance of phosphating film is improved by adding Ba2+ (0.6g/L)in zinc phosphate solution. The phosphating film is continuous and dense, whose crystalline size is less than or equal to 1~2μm. Its adhesive force reaches 1st grade after spraying epoxy resin antirust of iron oxide red.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19940111位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号