孙凤梅,张旭海,徐随春.电沉积铜-纳米石墨复合材料及其性能的研究[J].表面技术,2012,(5):34-37.
SUNF eng-mei,ZHANG Xu-hai,XU Sui-chun.Preparation of Copper Nano-graphite Composites by Electrodeposition and Study on Their Properties[J].Surface Technology,2012,(5):34-37 |
| 电沉积铜-纳米石墨复合材料及其性能的研究 |
| Preparation of Copper Nano-graphite Composites by Electrodeposition and Study on Their Properties |
| 投稿时间：2012-05-02 修订日期：2012-10-20 |
| DOI： |
| 中文关键词: 复合电沉积 铜-纳米石墨 微观形貌 摩擦磨损 |
| 英文关键词:composite electrodeposition copper nano-graphite morphology friction and wear |
| 基金项目:江苏省摩擦学重点实验室开放基金(kjsmcx1003) |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 在酸性硫酸铜镀液中,采用复合电沉积技术制备了铜-纳米石墨复合材料。观察了复合镀层的微观形貌,测试了复合镀层的硬度和摩擦磨损性能。研究发现:纳米石墨的添加量为7~10g/L时,镀层具有优良的摩擦磨损性能,且镀层的制备成本较低 |
| 英文摘要: |
| Copper nano-graphite composite materials were prepared by electrodeposition in an acidic copper sulfate solution. Morphology of the surface coating was observed. The hardness and friction and wear properties were tested. Experimental results show that the composite materials have good friction and wear properties and the costs are lower when the addition of nano-graphite is 7~10 g/L. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号