李彦迪,韩伟.水泵密封环喷熔自熔合金粉末及其抗磨蚀性能的研究[J].表面技术,2012,(4):60-62.
LI Yan-di,HAN Wei.Research on Self-melting Alloy Powder of Pump Seal-ring and Its Wear Resistance[J].Surface Technology,2012,(4):60-62
水泵密封环喷熔自熔合金粉末及其抗磨蚀性能的研究
Research on Self-melting Alloy Powder of Pump Seal-ring and Its Wear Resistance
投稿时间:2012-04-18  修订日期:2012-08-20
DOI:
中文关键词:  水泵  密封环  自熔合金粉末  抗磨蚀
英文关键词:pump  wearing ring  self-melting alloy powder  wear resistance
基金项目:国家自然科学基金资助项目(51079066)
作者单位
李彦迪 宁夏固海扬水管理处,中宁755100 
韩伟 兰州理工大学能源与动力工程学院,兰州730050 
AuthorInstitution
LI Yan-di Ningxia-sea Pumping Management Office, Zhongning 755100, China 
HAN Wei College of Energyand Power Engineering, Lanzhou University of Technology, Lanzhou 730050, China 
摘要点击次数:
全文下载次数:
中文摘要:
      针对固海扬水工程中泵站水泵密封环在高含沙水质条件下使用寿命短的问题,以镍基自熔性合金粉末为抗磨蚀层材料,采用氧-乙炔焰喷焊工艺在铸钢密封环上喷焊合金层,并进行抗磨蚀试验。结果表明:与铸钢密封环相比,喷焊合金层的密封环的抗磨损和汽蚀性能明显增强,使用寿命是铸钢密封环的2.75倍以上。
英文摘要:
      Under the condition of water with high sand content in pump station of ningxia-sea pumping project, the pump seal-ring is easily worn out. The oxy-acetylene flame spraying process was used to spray Ni-based self-fluxing alloy powder on the base of cast steel seal-ring for wear resistance experiment. The results show that, new seal-ring takes great advantages over the cast steel seal-ring in both resisting wear and cavitation and its life is over 2.75 times longer than that of the cast steel seal-ring.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19497765位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号