葛培林,刘小萍,尚魁平,冶艳,鲍明东.离子氮化对H13钢表面CrTiAlN 镀层结合强度的影响[J].表面技术,2012,(2):79-81.
GE Pei-lin,GE Pei-lin,GE Pei-lin,GE Pei-lin,GE Pei-lin.The Influence of Prior Plasma Nitriding on the Adhesion Strength of CrTiAlN Coating Formed on H13 Steel[J].Surface Technology,2012,(2):79-81
离子氮化对H13钢表面CrTiAlN 镀层结合强度的影响
The Influence of Prior Plasma Nitriding on the Adhesion Strength of CrTiAlN Coating Formed on H13 Steel
投稿时间:2011-11-24  修订日期:2012-04-20
DOI:
中文关键词:  离子氮化  磁控溅射  渗氮层  CrTiAlN 薄膜  结合强度
英文关键词:plasma nitriding  magnetron sputtering  nitrided layer  CrTiAlN coating  adhesion strength
基金项目:
作者单位
葛培林 太原理工大学表面工程研究所,太原030024 
刘小萍 太原理工大学表面工程研究所,太原030024 
尚魁平 宁波工程学院材料工程研究所,宁波315016 
冶艳 宁波工程学院材料工程研究所,宁波315016 
鲍明东 宁波工程学院材料工程研究所,宁波315016 
AuthorInstitution
GE Pei-lin Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan 030024, China 
GE Pei-lin Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan 030024, China 
GE Pei-lin Institute of Materials Engineering, Ningbo University of Technology, Ningbo 315016, China 
GE Pei-lin Institute of Materials Engineering, Ningbo University of Technology, Ningbo 315016, China 
GE Pei-lin Institute of Materials Engineering, Ningbo University of Technology, Ningbo 315016, China 
摘要点击次数:
全文下载次数:
中文摘要:
      在经过离子氮化处理的H13钢基体上,采用闭合场非平衡磁控溅射法制备了CrTiAlN 硬质涂层,并与未氮化的镀膜试样进行了膜基结合强度、膜层微观结构形貌及相组成的对比。结果表明:离子氮化处理可提高基体硬度,形成硬度梯度过渡;氮化+镀膜复合处理可以显著提高膜基结合强度。
英文摘要:
      A nitride layer was first formed on H13 steel samples by plasma nitriding and then a CrTiAlN coating was prepared on the surface of nitrided and non-nitrided H13 steels using closed field unbalanced magnetron sputter ion plating. The adhesion strength, the microstructure and phase structure of the film were compared between nitrided and non-nitrided H13.The results show that the substrate hardness increases after plasma nitridation and exhibits a gradient hardness transition. The complex treatment of plasma nitridation and CrTiAlN coatings could increase the adhesion strength significantly.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19965436位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号