王洺浩,周超亮,胡晋,谢磊,李宁.浸锌液中甘油对提高铝浸锌层上电镀层结合力的作用[J].表面技术,2012,(2):74-78.
WANG Ming-hao,ZHOU Chao-liang,HU Jin,XIE Lei,LI Ning.Effect of Glycer in in Zincate Solution on Improving Cohesive Force of Electroplating Coating on Aluminum Substrate[J].Surface Technology,2012,(2):74-78
浸锌液中甘油对提高铝浸锌层上电镀层结合力的作用
Effect of Glycer in in Zincate Solution on Improving Cohesive Force of Electroplating Coating on Aluminum Substrate
投稿时间:2011-12-12  修订日期:2012-04-20
DOI:
中文关键词:  甘油    浸锌  滞留液膜  结合力
英文关键词:glycerin  aluminum  zincation  retained liquid film  adhesion
基金项目:
作者单位
王洺浩 哈尔滨工业大学化工学院,哈尔滨150001 
周超亮 无锡新大中薄板有限公司,无锡214183 
胡晋 无锡新大中薄板有限公司,无锡214183 
谢磊 无锡新大中薄板有限公司,无锡214183 
李宁 哈尔滨工业大学化工学院,哈尔滨150001 
AuthorInstitution
WANG Ming-hao Chemical College, Harbin Institute of Technology, Harbin 150001, China 
ZHOU Chao-liang Wuxi Xindazhong Steel Sheet Co., LTD,Wuxi 214184, China 
HU Jin Wuxi Xindazhong Steel Sheet Co., LTD,Wuxi 214184, China 
XIE Lei Wuxi Xindazhong Steel Sheet Co., LTD,Wuxi 214184, China 
LI Ning Chemical College, Harbin Institute of Technology, Harbin 150001, China 
摘要点击次数:
全文下载次数:
中文摘要:
      考虑到甘油的保湿作用,提出在浸锌液中添加甘油,以期改善铝合金大工件浸锌后时而出现的上部镀层结合力不良的现象。利用pH 试纸液痕法、时间-电位曲线测试及热震-划格法,分别研究了采用加入不同浓度甘油的浸锌液一次浸锌后,铝试片上滞留液膜的分布、浸锌层的稳定电位变化及后续镀层结合力。结果表明:加入甘油后,浸锌液膜分布均匀,甘油质量浓度为20g/L时可有效防止浸锌层上部因液膜干燥而被氧化,从而保证后续镀镍层的结合力。
英文摘要:
      Addition of glycerin in zincate solution was first reported in consideration of its moisturizing function to improve the adhesive force of upper electroplating nickle layer. Method of observing liquid mark on pH test paper, time-potential curve measurement and thermal shock followed by cross cut test were utilized to study the retained liquid film distribution, the potential development of zincate film and adhesive force of electroplating nickle coating on aluminum substrate respectively after one time zincate immersion with different concentration of glycerin in zincate solution. It indicated that the retained liquid film became well-distributed when 20g/L glycerin was added and oxidation of the upperzincate layer caused by liquid film drying was conquered to guarantee the well-adhesion of successive electroplating coat.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20119465位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号