尚伟,温玉清,李秀广,黄明仁,卢钇成.AZ91D 镁合金微弧氧化电参数对其耐蚀性的影响[J].表面技术,2012,(1):37-40. SHANG Wei,WEN Yu-qing,LI Xiu-guang,HUANG Ming-ren,LU Yi-cheng.Effects of Electric Parameters on Properties of Micro-arc Oxidation Films Formed on Magnesium Alloys AZ91D[J].Surface Technology,2012,(1):37-40 |
AZ91D 镁合金微弧氧化电参数对其耐蚀性的影响 |
Effects of Electric Parameters on Properties of Micro-arc Oxidation Films Formed on Magnesium Alloys AZ91D |
投稿时间:2011-09-18 修订日期:2012-02-20 |
DOI: |
中文关键词: 镁合金 微弧氧化 电参数 田口式实验设计法 交流阻抗 |
英文关键词:magnesium alloy micro-arc oxidation electric parameters taguchi experimental analysis method EIS |
基金项目:广西教育厅科研项目(200911MS110);广西教育厅科研项目(201012MS104) |
|
Author | Institution |
SHANG Wei | Guilin University of Technology, Guilin 541004,China |
WEN Yu-qing | University of Science and Technology Beijing,Beijing 100083, China |
LI Xiu-guang | Guilin University of Technology, Guilin 541004,China |
HUANG Ming-ren | Guilin University of Technology, Guilin 541004,China |
LU Yi-cheng | Guilin University of Technology, Guilin 541004,China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
在铝酸盐体系中对AZ91D镁合金进行微弧氧化处理。利用田口式实验设计法探讨微弧氧化过程电参数对膜层耐蚀性的影响,确定了最佳工艺参数为:电压180V,氧化时间30min,频率50Hz,占空比30%。用交流阻抗分析膜层的耐腐蚀性能,结果表明:最佳工艺条件下所制备微弧氧化,膜层电阻比镁合金基体提高了2个数量级,耐蚀性有所增强。 |
英文摘要: |
Micro-arc oxidation films were prepared on magnesium alloy AZ91D in a aluminate electrolyte. The effects of electric parameters during the micro-arc oxidation process on properties of MAO films were systematically investigated using the Taguchi experimental analysis method. The optimized parameters are 180 V voltage, 30 min oxidation time,50 Hz frequency,30% duty cycle. The corrosion resistance of the MAO film was examined by means of AC impedance.The results show that the resistance of MAO film treated on optimized conditions increase by two orders compared with the magnesium alloy substrate. This enhances the corrosion resistance of the magnesium alloy. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|