王宇,贾晓芳,刘晓魁,高鹏飞,曾志军,聂明,聂朝胤.冷轧带钢表面残污物检测方法的研究现状[J].表面技术,2010,39(4):83-86.
WANG Yu,JIA Xiao-fang,LIU Xiao-kui,GAO Peng-fei,ZENG Zhi-jun,NIE Ming,NIE Chao-yin.Research Status of Detection Methods of Surface Remainders on Cold Rolled Strip[J].Surface Technology,2010,39(4):83-86 |
| 冷轧带钢表面残污物检测方法的研究现状 |
| Research Status of Detection Methods of Surface Remainders on Cold Rolled Strip |
| 投稿时间：2010-03-09 修订日期：2010-08-10 |
| DOI： |
| 中文关键词: 冷轧带钢 表面残污物 清洁度 定性检测 定量检测 |
| 英文关键词:cold rolled strips surface remainders cleanness qualitative detection quantitative detection |
| 基金项目:中冶赛迪工程技术股份有限公司支持项目 |
|
|
| Author | Institution |
| WANG Yu | Cisdi Engineering CO LTD, Chongqing 400013, China |
| JIA Xiao-fang | Materials Science and Engineering College of Southwest University, Chongqing 400715, China |
| LIU Xiao-kui | Materials Science and Engineering College of Southwest University, Chongqing 400715, China |
| GAO Peng-fei | Materials Science and Engineering College of Southwest University, Chongqing 400715, China |
| ZENG Zhi-jun | Materials Science and Engineering College of Southwest University, Chongqing 400715, China |
| NIE Ming | Materials Science and Engineering College of Southwest University, Chongqing 400715, China |
| NIE Chao-yin | Materials Science and Engineering College of Southwest University, Chongqing 400715, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 综述了冷轧带钢表面残污物的主要成分及其检测方法,主要包括称量法、有机溶剂浸洗-质量法、反射率法、接触法、循环伏安法、水滴法等。对比了各种方法的优缺点,提出了目前带钢表面残污物检测手段存在的主要问题及解决方法。 |
| 英文摘要: |
| Main components and detection methods of surface remainders of cold rolled strip were reviewed,including the weight method, organic solvents soaking and weight, reflectivity method, contact angle method, cyclic voltammetry, water drops, and so on. The advantages and weaknesses of each method were compared in order to make the detection more reasonable. Main problems remained and some possible solutions to surface remainders detection were proposed. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号