刘秀娟,李庆亮,姜俊侠,刘白,王华昌.TD法盐浴渗钒层初期生长表面形貌的研究[J].表面技术,2010,39(4):39-41.
LIU Xiu-juan,LI Qing-liang,JIANG Jun-xia,LIU Bai,WANG Hua-chang.Study on Growth of Vanadium Carbide Coating at Initial Stage of Salt Bath Vanadizing Process[J].Surface Technology,2010,39(4):39-41
TD法盐浴渗钒层初期生长表面形貌的研究
Study on Growth of Vanadium Carbide Coating at Initial Stage of Salt Bath Vanadizing Process
投稿时间:2010-03-28  修订日期:2010-08-10
DOI:
中文关键词:  盐浴渗钒  碳化钒覆层  形貌  成分分布
英文关键词:salt bath vanadizing process  vanadium carbide coating  morphology  composition distribution
基金项目:深圳信息学院第三批院内项目(QN-08004);深圳信息学院创新团队项目(CXTD1-007)
作者单位
刘秀娟 深圳信息学院,深圳518029 
李庆亮 深圳信息学院,深圳518029 
姜俊侠 深圳信息学院,深圳518029 
刘白 深圳信息学院,深圳518029 
王华昌 武汉理工大学材料科学与工程学院,武汉430070 
AuthorInstitution
LIU Xiu-juan Shenzhen Institute of Information Technology, Shenzhen 518029, China 
LI Qing-liang Shenzhen Institute of Information Technology, Shenzhen 518029, China 
JIANG Jun-xia Shenzhen Institute of Information Technology, Shenzhen 518029, China 
LIU Bai Shenzhen Institute of Information Technology, Shenzhen 518029, China 
WANG Hua-chang School of Material Science and Engineering, Wuhan University of Technology, Wuhan 430070, China 
摘要点击次数:
全文下载次数:
中文摘要:
      在不同温度下对T12钢基体进行不同时间的盐浴渗钒处理,采用扫描电镜、电子探针和XRD等分析手段,分析了渗钒层初期生长的表面形貌演变过程,并对比了国产供应态和球化退火态两种T12钢基体上渗钒初期的覆层形貌和成分分布。结果表明:在不同温度下渗钒,覆层的初期生长都是初始晶核不断形成并生长,直至覆盖整个表面,同时在初始晶粒上生成超细晶粒,最终形成非常光滑的表面;温度不同,则覆层形成类似形貌所需的处理时间不同;覆层形成初期的形貌受基体组织的影响,使基体中的渗碳体均匀分布有利于均匀致密覆层的形成。
英文摘要:
      Salt-bath vanadizing process was carried out at different temperatures on the T12 steel substrate for different time. By scanning electron microscopy, XRD,electron microprobe, vanadizing surface morphology evolution at the early stage was analyzed.And comparison of the morphology and composition distribution of initial vanadizing coating between the substrates of domestic supply state T12 steel and globalization annealed state T12 steel was performed. The following results can be obtained:1)at different temperatures, all the initial vanadizing coatings are formed through initial nucleation and growth to cover the whole substrate, and sub-micro sized grain formation on the initial grains, and finally formation of a very smooth surface,2)the time for formation of similar morphology is different at various temperatures, 3)the microstructure of substrate has effect on the early appearance of vanadizing coating and the uniform distribution of cementite in the substrate helps the formation of uniform and dense coating.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20049949位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号