王利捷,杨军胜.钛合金表面MoS2/TiN复合涂层的摩擦性能研究[J].表面技术,2010,39(2):11-13.
WANG Li-jie,YANG Jun-sheng.The Study on Tribological Properties of MoS2/TiN Composite Coating on the Surface of Titanium Alloy[J].Surface Technology,2010,39(2):11-13
钛合金表面MoS2/TiN复合涂层的摩擦性能研究
The Study on Tribological Properties of MoS2/TiN Composite Coating on the Surface of Titanium Alloy
投稿时间:2010-01-26  修订日期:2010-04-10
DOI:
中文关键词:  钛合金  离子渗氮  磁控溅射  MoS2/ TiN复合涂层
英文关键词:Titanium alloy  Plasma Nitriding  Magnetron sputtering  MoS2/ TiN composite coating
基金项目:
作者单位
王利捷 长安大学,西安710046 
杨军胜 长安大学,西安710046 
AuthorInstitution
WANG Li-jie Chang'an University, Xi'an 710064, China 
YANG Jun-sheng Chang'an University, Xi'an 710064, China 
摘要点击次数:
全文下载次数:
中文摘要:
      采用复合处理的工艺方法,在Ti-6Al-4V合金表面制备复合涂层。用X射线衍射仪、扫描电子显微镜和X射线能谱仪分析复合涂层表面相结构、表面及截面微观形貌和沿截面各元素分布状态。对不同处理后的截面硬度梯度进行了分析比较,在MM-200磨损实验机上测定了复合涂层的摩擦性能。结果显示,复合涂层是由单质的Ti,Mo和MoS2,TiN以及过渡层组成,在干摩擦、纯滑动的条件下摩擦性能优良。
英文摘要:
      A composite coating layer was formed on the surface of Ti-6Al-4V alloy by the combined treatmeng process.The phase structure of the surface were analyzed by XRD,the microstructure of the surface and cross-secture were investigated by SEM,the distribution of the element along the cross-secture were studied by EDS.The cross-section hardness gradient after different treatment were compared.The tribological properties of the composite coating were tested on MM-200 wear machine.The results indicate that the composite coating layers are composed of the Ti,Mo,MoS2, TiN and transition layer.The tribological properties are improved in the dry friction and pure slippage condition.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19510753位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号