曾宪光,喻兰英,李新跃,郑兴文.新型高温磷酸盐胶粘剂的制备和研究[J].表面技术,2010,39(1):103-105.
ZENG Xian-guang,YU Lan-ying,LI Xin-yue,ZHENG Xing-wen.Prepation and Study on New Phosphate Adhesive at High Temperature[J].Surface Technology,2010,39(1):103-105
新型高温磷酸盐胶粘剂的制备和研究
Prepation and Study on New Phosphate Adhesive at High Temperature
投稿时间:2009-10-30  修订日期:2010-02-10
DOI:
中文关键词:  磷酸盐  胶粘剂  高温
英文关键词:Phosphate  Adhesives  High temperature
基金项目:
作者单位
曾宪光 四川理工学院,自贡643000 
喻兰英 四川理工学院,自贡643000 
李新跃 四川理工学院,自贡643000 
郑兴文 四川理工学院,自贡643000 
AuthorInstitution
ZENG Xian-guang Sichuan University of Science and Engineering, Zigong 643000, China 
YU Lan-ying Sichuan University of Science and Engineering, Zigong 643000, China 
LI Xin-yue Sichuan University of Science and Engineering, Zigong 643000, China 
ZHENG Xing-wen Sichuan University of Science and Engineering, Zigong 643000, China 
摘要点击次数:
全文下载次数:
中文摘要:
      以磷酸、氢氧化铝、氧化铜等为主要原料,拟制备出具有高粘结性且耐高温氧化的胶粘剂。采用正交试验方法优选出配方,讨论了氧化铜粒径、固化温度、固化时间、氢氧化铝对其粘结性能的影响。验证实验表明:开发的新型高温磷酸盐胶粘剂,制备工艺简单,最佳固化温度为120℃ ,最佳固化时间为4 h;该胶粘剂粘结性能好,耐高温,呈淡黄青色,具有广阔的应用前景。
英文摘要:
      Some raw materials such as phosphoric acid,aluminum hydroxide and copper oxide were mainly used to prepare adhesive with high bond and heat-resisting, a optimal adhesive formulation was selected through orthogonal experimental method. The effect of copper oxide particle size, curing temperature, curing time and aluminum hydroxide on the bonding properties was discussed. Results show that new phosphate adhesive is provided with simple preparation process, good adhesion, heat-resisting and broad application prospects, and it appeares pale yellow green with curing temperature of 120℃ and curing time of 4 h.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19509442位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号