纪红,孙凤仙,李永丰.建筑铝型材平均耐磨性的测定[J].表面技术,2010,39(1):89-90,100.
JI Hong,SUN Feng-xian,LI Yong-feng.Mean Specific Resistance Measurement of Aluminum Alloy Profile[J].Surface Technology,2010,39(1):89-90,100 |
| 建筑铝型材平均耐磨性的测定 |
| Mean Specific Resistance Measurement of Aluminum Alloy Profile |
| 投稿时间：2009-06-16 修订日期：2010-02-10 |
| DOI： |
| 中文关键词: 铝型材 耐磨性 喷磨试验法 |
| 英文关键词:Aluminum alloy profile Abrasion resistance Abrasive jet test |
| 基金项目:科技部“科学仪器设备升级改造专项”资助项目(2006SJ166300) |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为研究建筑铝型材的耐磨性测试方法,采用喷磨试验仪对铝合金建筑型材进行了测试,并考察了其平均耐磨性。选用特定的磨料,控制空气压力、流速等参数,测得铝型材的喷磨时间,将其与标准试样的喷磨时间相比,通过计算可获得建筑铝型材的平均耐磨性。结果表明:喷磨试验法可用于检测氧化、电泳、粉末喷涂等不同表面处理膜层的耐磨性,且具有操作简单、方便,试验时间短,重现好等特点,有望在今后的检测实践中推广使用。 |
| 英文摘要: |
| In order to investigate the abrasive resistance test method of aluminum alloy profile, the abrasive resistance of aluminum alloy profile was measured by an abrasive jet test apparatus, and the mean specific abrasion resistance was analyzed. By choosing the special abrasive and controlling the air pressure and flow, the abrasion time can be obtained. Then the abrasion resistance can be obtained from the comparison of the abrasion time between the specimen and the standard specimen. The results show that it can be used for anodic oxide coating, electrophoresis coating, powder coating, etc. with advantages of shorten time, simplicity of operator, and good repeatability, and can be used extensively in the future. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号