许刚,张秀芝,张义帅.镁合金表面Ni-P/Ni镀层的制备与性能研究[J].表面技术,2010,39(1):71-73,80.
XU Gang,ZHANG Xiu-zhi,ZHANG Yi-shuai.Study on the Preparation and Properties of Ni-P/Ni Duplex Coating on the Surface Magnesium Alloys[J].Surface Technology,2010,39(1):71-73,80 |
| 镁合金表面Ni-P/Ni镀层的制备与性能研究 |
| Study on the Preparation and Properties of Ni-P/Ni Duplex Coating on the Surface Magnesium Alloys |
| 投稿时间：2009-11-03 修订日期：2010-02-10 |
| DOI： |
| 中文关键词: 双镀层 化学镀 电镀 镀镍 热处理 |
| 英文关键词:Duplex coating Electroless deposition Electrodeposion Ni plating Heat treatment |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 在镁合金表面先化学镀Ni-P层,再电镀Ni,获得高耐蚀性Ni-P/Ni镀层,并用静态腐蚀浸泡法研究了化学镀时间和电镀时间对所得镀层在5%NaCl溶液中的耐蚀性能的影响。结果表明,先化学镀40 min,再电镀15 min所得的Ni-P/Ni镀层具备高耐蚀性能,电化学测试结果表明,此种镀层在酸性和碱性溶液中都具有较好的耐蚀性能。在200℃热处理24 h后,Ni-P/Ni镀层的耐蚀性提高,同时外层Ni层的显微硬度从HV460增大到HV550。镀层侧面的SEM照片显示,镀层均匀致密,与基体结合良好,化学镀层与电镀层之间没有明显的界限。 |
| 英文摘要: |
| The high corrosion resistance Ni-P/Ni duplex coating was deposited on the surface of magnesium alloys by electroless depositing Ni-P and following electrodepositing Ni. The effect of electroless deposition and electrodeposition time on the corrosion resistance of the duplex coating was investigated by static corrosion immersion in the 5% NaCl aqueous solution. the results indicate that only the electroless deposition time no less then 40 min, the duplex coating get high corrosion resistance. The observations of linear sweep polarization curve experimentsindicate thatbothin the acidic solution and alkalic solution the duplex coating has good corrosion resistance.Afterheat treatment at200℃ for24 hours the corrosion resistance of the Ni-P/Ni duplex coating increases and the microhardness of the eletrodeposition exteriorNi layerincreases from HV460 to HV550. The SEM observation of the cross section of the duplex coating indicates that the coating is connected well to the magnesium substrate and there isn't obviously interface between the Ni-P layer and Ni layer. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号