吴永发,汪刘应,华绍春,刘顾,赵瑞星.热喷涂NiCr/纳米(Zr02 +8% Y2 03)梯度涂层的性能研究[J].表面技术,2008,37(4):18-20,34.
WU Yong-fa,WANG Liu-ying,HUA Shao-chun,LIU Gu,ZHAO Rui-xing.Research on the Properties of Thermal Sprayed NiCr/Nanostructured ( ZrO2 +8 %Y203) Gradated Coating[J].Surface Technology,2008,37(4):18-20,34
热喷涂NiCr/纳米(Zr02 +8% Y2 03)梯度涂层的性能研究
Research on the Properties of Thermal Sprayed NiCr/Nanostructured ( ZrO2 +8 %Y203) Gradated Coating
投稿时间:2008-04-07  修订日期:2008-08-10
DOI:
中文关键词:  NiCr合金  纳米(ZrO2 +8% Y203)陶瓷  梯度涂层  力学性能
英文关键词:NiCr alloy  Nanostructured ( ZrO2 +8% Y203) ceramic, Gradated coating  Mechanical properties
基金项目:
作者单位
吴永发 第二炮兵工程学院五系,陕西西安710025 
汪刘应 第二炮兵工程学院五系,陕西西安710025 
华绍春 第二炮兵工程学院五系,陕西西安710025 
刘顾 第二炮兵工程学院五系,陕西西安710025 
赵瑞星 第二炮兵工程学院五系,陕西西安710025 
AuthorInstitution
WU Yong-fa 5th Dep. , Second Artillery Engineering University, Xian 710025, China 
WANG Liu-ying 5th Dep. , Second Artillery Engineering University, Xian 710025, China 
HUA Shao-chun 5th Dep. , Second Artillery Engineering University, Xian 710025, China 
LIU Gu 5th Dep. , Second Artillery Engineering University, Xian 710025, China 
ZHAO Rui-xing 5th Dep. , Second Artillery Engineering University, Xian 710025, China 
摘要点击次数:
全文下载次数:
中文摘要:
      针对陶瓷涂层与基体结合强度低、易产生裂纹和剥落的现象,进行了抗高温氧化耐磨损梯度涂层的设计。采用热喷涂技术在45钢基体表面制备由面层[纳米(Zr02 +8% Y203)]和中间层(NiCr)组成的梯度涂层,利用扫描电镜(SEM)、测定结合强度、测定显微硬度、X射线衍射等方法研究涂层的性能。结果表明:NiCr/纳米(Zr02+ 8% Y203)梯度涂层显微组织结构致密,与NiCr合金涂层和纳米(Zr02,+8% Y2 03)陶瓷涂层相比,具有更优良的力学性能;梯度涂层的面层有利于提高基体的耐高温、耐磨损性能,而中间层则有利于改善基体的抗高温氧化性能。
英文摘要:
      The high temperature oxidation and wear resistance gradated coating for improving the bonding strength between the ceramic coating and the substrate was designed. The properties of the gradated coating with the surface layer of nanostructured ( ZrO2 +8% Y203 ) and the middle layer of NiCr prepared by thermal spray on the 45 steel, were studied by scanning electronic microscope( SEM) , X-ray diffraction, bonding strength and microhardness measurements. The results show that NiCr/nanostructured ( ZrO2 +8%Y203) gradated coating microstructure is very dense and its mechanical properties are better than that of NiCr alloy coating or nanostructured ZrO2 ceramic coating, the high temperature and wear resistance of the gradated coating can be improved by the surface layer and the high temperature oxidation resistance can be enhanced by the middle layer.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19949065位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号