程占保,苏向东,朱维东,李娜.NiTi合金表面电化学氧化制备Ti02膜[J].表面技术,2008,37(4):4-5,14.
CHENG Zhan_bao,SU Xiang-dong,ZHU Wei-dong,LI Na.Preparation of Ti02 Film by Electrochemical Oxidation on the Surface of NiTi SMA[J].Surface Technology,2008,37(4):4-5,14
NiTi合金表面电化学氧化制备Ti02膜
Preparation of Ti02 Film by Electrochemical Oxidation on the Surface of NiTi SMA
投稿时间:2008-03-24  修订日期:2008-08-10
DOI:
中文关键词:  NiTi形状记忆合金  极化曲线  电化学氧化  Ti02膜  耐蚀性
英文关键词:NiTi SMA  Polarization curve  Electrochemical oxidation  Ti02 film  Corrosion resistance
基金项目:贵州省优秀科技教育人才省长专项资金项目[ (2005)214号)
作者单位
程占保 1.贵州大学材料科学与冶金工程学院,贵州贵阳550003;2.贵州省材料结构与强度重点实验室,贵州贵阳550003 
苏向东 1.贵州科学院,贵州贵阳550002;2.北京航空航天大学理学院,北京100083 
朱维东 1.贵州大学材料科学与冶金工程学院,贵州贵阳550003;2.贵州省材料结构与强度重点实验室,贵州贵阳550003 
李娜 1.贵州大学材料科学与冶金工程学院,贵州贵阳550003;2.贵州省材料结构与强度重点实验室,贵州贵阳550003 
AuthorInstitution
CHENG Zhan_bao 1. College of Materials Science and Metallurgy Engineering of Guizhou University, Guiyang 550003, China;2. Guizhou Key Lab. for Structure of Materials and Mechanical Behavior, Guiyang 550003, China 
SU Xiang-dong 1. Guizhou Academy of Sciences, Guiyang 550002, China;2. College of Science of Beijing University of Aeronautics and Astronautics, Beijing 100083, China 
ZHU Wei-dong 1. College of Materials Science and Metallurgy Engineering of Guizhou University, Guiyang 550003, China;2. Guizhou Key Lab. for Structure of Materials and Mechanical Behavior, Guiyang 550003, China 
LI Na 1. College of Materials Science and Metallurgy Engineering of Guizhou University, Guiyang 550003, China;2. Guizhou Key Lab. for Structure of Materials and Mechanical Behavior, Guiyang 550003, China 
摘要点击次数:
全文下载次数:
中文摘要:
      采用恒电流阳极氧化法在NiTi形状记忆合金(SMA)表面制备完整致密且耐腐蚀的Ti02膜。通过对NiTi SMA和纯Ti在稀HC1中的动电位阳极极化曲线的分析,得到了选择性脱Ni阳极氧化电流密度工艺参数。试验采用稀HC1体系,以该工艺参数进行阳极氧化处理5 min,在NiTi SMA表面制备出了完整致密的Ti02膜,并进行了其表面的SEM、XRD、XPS分析和NiTi SMA表面处理前后在模拟唾液fusayama中的对比腐蚀试验测试。结果表明:经阳极氧化处理的NiTi SMA表面形成了十几纳米厚的Tio2膜,且其耐蚀性有明显的提高。
英文摘要:
      By the method of constant-current anodic oxydation, integrated and compact Ti02 films with anti-corrosion atmosphere will be prepared on the surface of NiTi SMA. By compared between the potentiodynamic polarization curves of NiTi SMA and pure Ti in HCl, it obtains technological parameter of current density while selective dissolution of Ni. In HCl system, under this technology parameter and anodic oxydation treatment for 5 minutes, integrated and compact Ti02 film on NiTi SMA surface was obtained and analyzed by SEM, XRD, XPS, given many contrast corrosion test in the simulant saliva fusayama for untreated and treated NiTi SMA . The result shows that tens of nanometers thickness anatase Ti02 film is formed at NiTi SMA surface after anodic oxidation, the corrosion resistance of the film is greatly improved.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19500042位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号