亢淑梅,王琳,李成威,陈华.中温酸性化学镀Ni-P合金耐蚀性能研究[J].表面技术,2008,37(3):27-29.
KANG Shu-mei,WANG Lin,LI Cheng-wei,CHEN Hua.Study on Corrosion Resistance of Electroless Ni-P Alloy in the Acidic Solution at Middle Temperature[J].Surface Technology,2008,37(3):27-29
中温酸性化学镀Ni-P合金耐蚀性能研究
Study on Corrosion Resistance of Electroless Ni-P Alloy in the Acidic Solution at Middle Temperature
投稿时间:2008-03-15  修订日期:2008-06-10
DOI:
中文关键词:  化学镀  Ni-P合金  耐蚀性  热处理
英文关键词:Electroless plating  Ni-P alloy  Corrosion resistance  Heat treatment
基金项目:
作者单位
亢淑梅 辽宁科技大学材料学院,辽宁鞍山114051 
王琳 辽宁科技大学材料学院,辽宁鞍山114051 
李成威 辽宁科技大学材料学院,辽宁鞍山114051 
陈华 鞍钢股份公司中厚板厂,辽宁鞍山114021 
AuthorInstitution
KANG Shu-mei School of Materials Science and Engineering, Liaoning University of Science and Technology, Liaoning 114051, China 
WANG Lin School of Materials Science and Engineering, Liaoning University of Science and Technology, Liaoning 114051, China 
LI Cheng-wei School of Materials Science and Engineering, Liaoning University of Science and Technology, Liaoning 114051, China 
CHEN Hua Medium and Heavy Plate Plant Angang Steel Company Limited, Anshan 114021, China 
摘要点击次数:
全文下载次数:
中文摘要:
      为提高化学镀Ni-P合金耐蚀性能,以Q235钢为待镀基体,在中温的酸性条件下,采用正交试验方法得到镀层耐蚀性最佳的工艺条件为:镀液pH值5.2;Ni2+与H2PO2 -的摩尔比为0. 48;复合络合剂乳酸15mL/L+丙酸5mUL;加速剂NaF 0.4g/L;热处理温度500℃。在此条件下,腐蚀电流为2.166 x10 -5A,可较好地提高镀层耐蚀性。
英文摘要:
      To improve the corrosion resistance of electroless Ni-P alloy, used Q235 steel as substrates, the effect of process parameters on the corrosion resistance of the nickel-plating was studied in the acidic solution at middle temperature by the orthogonal experimental method. By the range analysis, the best conditions were determined:process for the best prescription: molar ratio of Nj2+ and H2P02 - is 0. 48 ; compound complexing agent of lactic acid is 15mL/L; propionic acid is 5mL/L; accelerator NaF is 0.4 g/L; Stabilizer thiourea is Img/L; buffer sodium acetate is 16.5g/L; surfactants lauryl sodium sulfonate is lOmg/L; pH value 5.2; plating time is 2h; heat treatment temperature is 500℃. On the condition, the corrosion current is 2. 166 x 10 -5A and the corrosion resistance is improved.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20123705位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号