杨芳,陈淼.CeCl对H08Mn2Si焊丝镀铜层性能的影响[J].表面技术,2008,37(2):34-36.
YANG Fang,CHEN Miao.Effect of CeCI on Performance of H08Mn2Si Cu Coating[J].Surface Technology,2008,37(2):34-36 |
| CeCl对H08Mn2Si焊丝镀铜层性能的影响 |
| Effect of CeCI on Performance of H08Mn2Si Cu Coating |
| 投稿时间：2007-11-22 修订日期：2008-04-10 |
| DOI： |
| 中文关键词: 稀土氯化物 化学镀铜 焊丝 耐蚀性 |
| 英文关键词:Rare-earth chloride Electroless copper plating Welding wire Corrosion resistance |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 在二氧化碳气体保护焊丝酸性镀铜液中加入稀土氯化物CeCl添加剂。研究了CeCl的添加量、施镀时间、施镀温度对焊丝镀铜层的耐蚀性、结合强度及外观的影响。试验表明：适量的CeCl添加到镀铜液中可明显改善焊丝镀铜层的质量，建议在基本镀液配方的基础上添加1×10 -4 一1×10 -3g/L的CeCl;而且，CeCl的加入使施镀工艺范围拓宽，施镀温度为30 - 50℃，施镀时间为5 -15s均可获得性能较佳的镀铜层。 |
| 英文摘要: |
| The CeCl additive was added into the acid copper-plating solution which is used for manufacturing the wire of C02 gas shield welding. The effects of the content of CeCI, the plating time and the plating temperature on the corrosion resistance, the bonding strength and the appearance of Cu coating were studied. The experimental results indicate that a addition of CeCI will remarkably improve the quality of Cu coating, and l x 10 -4 _ 1 x 10 -3g/L CeCI can be adding in the basic formula to expand the plating process. Plating temperature is 30 ~50℃ , and plating time is between 5s and 15s. The above condition can make better Cu coating. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号