李德良,王丹,罗洁,龙丽娟,彭芸.乙醇胺碱性蚀铜液的研究[J].表面技术,2008,37(1):28-31.
LI De-Iiang,WANG Dan,LUO Jie,LONG Li-juan,PENG Yun.Study on an Ethanolamine-containing Alkaline Etching Solution[J].Surface Technology,2008,37(1):28-31 |
| 乙醇胺碱性蚀铜液的研究 |
| Study on an Ethanolamine-containing Alkaline Etching Solution |
| 投稿时间：2007-10-18 修订日期：2008-02-10 |
| DOI： |
| 中文关键词: 蚀铜液 乙醇胺 蚀刻速率 侧蚀因子 |
| 英文关键词:Etcher Ethanolamine Etching rate Undercutting factor |
| 基金项目:国家科技部2005年度创新基金资助项目(05C26224301143) |
|
|
| Author | Institution |
| LI De-Iiang | Central South University of Forest and Technology, Changsha 410004 , China |
| WANG Dan | Changsha Es-Crown Environmental Hi-tech Co. , Ltd. , Changsha 410008, China |
| LUO Jie | Central South University of Forest and Technology, Changsha 410004 , China |
| LONG Li-juan | Central South University of Forest and Technology, Changsha 410004 , China |
| PENG Yun | Central South University of Forest and Technology, Changsha 410004 , China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为了开发一种新型碱性蚀刻液以代替传统的氨类蚀刻液，该蚀刻液的组成特点是以铜．乙醇胺络合物、氯离子和碱性pH缓冲液作为主要成分。分别采用静态吊片蚀刻法和动态喷淋蚀刻研究方法探索了其最佳配方和操作条件，结果表明在铜离子浓度为85 - 95g/L，氯离子浓度3.5-4. 5mol/L，乙醇胺浓度4.5-5 mol/L，添加剂浓度0.5-1. Sg/L，pH为8.5-9.0，操作温度为55 -60℃时，其蚀刻状态最佳，相应的静态和动态蚀刻速率分别达6μm/min和20μm/min，与氨类蚀刻液的对应指标相当，且防侧蚀指标更高。结论是该碱性蚀刻液在生产配制、使用和再生循环过程中无废气排放，技术指标优越，具有良好的工业应用前景。 |
| 英文摘要: |
| An environment-friendly alkali-etcher was studied to replace the traditional ammonia etcher. It was characterized by the solution containing copper-ethanolamine complex, chlorine and alkali-buffer as the main components. Static and spray etching methods were used to get its optimum operating parameters. The results show that the novel etcher is as good as ammonia type in its quality index especially for the undercutting factor, and can meet the PCB standards. Its etching rate reaches 6 μm/min and 20 μm/min for static and spray process respectively, when maintaining its copper concentration ( 85 - 95 ) g/L, chlorine (3. 5 -4. 5 ) mol/L, ethnolamine (4. 5 -5 ) mol/L, additive (0. 5 - 1. 5) g/L , pH 8. 5 ~9.0 and temperature ( 55 ~ 60 ) oC . It can be concluded that the novel etcher is a competitive altemative for the etching process, and will benefits the PCB consumers in high quality and no discharge of waste gas in its making-up, usage including regeneration and recycling, and after-use treatments. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号